ASSEMBLY INSTRUCTION Sofa Table
Part Identification While not all parts are labeled, some of the parts will have a label to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
Step 01 NOTE: DO NOT fully tighten all bolts at this step. Lay the Metal Frames(②) Parallel to each other on a clean smooth surface such as carpet or cardboard. Attach 3 Shelves (①) into metal frames(②) with Screws(A) by Allen key(B). Do not fully tighten all bolts until all parts are in place. Step 02 Adjust levelers(C) as needed for uneven flooring. If holes don't align, loosen all bolts and adjust the Step 03 NOTE: holes slightly. After all holes are aligned, fully tighten all bolts.
Thank you for purchasing. If any part is missing or damaged, please do not hesitate to contact us. ASSEMBLY TIPS 1. Please read the assembly instructions first and become familiar with the parts. 2. Proper assembly of this item requires 2 people. 3. Unpack and assemble this unit in an spacious area, assemble the unit on top of the empty carton or carpet to prevent scratches. 4. To avoid accidentally discarding small parts or hardware, DO NOT dispose of any contents until assembly is completed. 5.
