Installation & Assembly

Table Of Contents

Step 01

Step 02

Adjust levelers(C) as needed for uneven flooring.

Step 03

NOTE: If holes don't align, loosen all bolts and adjust the

holes slightly. After all holes are aligned, fully tighten all bolts.

Page 03

Lay the Metal Frames(

②

) Parallel to each other on

a clean smooth surface such as carpet or cardboard

Attach 3 Shelves (①) into metal frames(②) with Screws(A) by Allen key(B). Do not fully tighten all bolts until all

parts are in place.

Flip the table upright.