Installation & Assembly

Living room 20x48" Wall Storage

1 of 3 20x48" Wall Storage

NO. DRAWING DESCRIPTION QTY

METAL FRAME

SHELF

NO. DRAWING DESCRIPTION QTY

M6x35MM BOLT

ALLEN KEY

4x60MM SCREW

Thank you for purchasing the Living room 20x48" Wall Storage. We have found it helpful to have a

second person present during the assembly process.

Wall Storage Assembly Instructions

Parts

DRYWALL EZ

ANCHOR

PAGE 1
Living room 20x48" Wall Storage Thank you for purchasing the Living room 20x48" Wall Storage. We have found it helpful to have a second person present during the assembly process. Wall Storage Assembly Instructions Parts NO. A B DRAWING DESCRIPTION QTY METAL FRAME 2 SHELF NO.
PAGE 2
Step 1 Read through these instructions thoroughly before beginning assembly. We have found this to be of great value when assembling this product. Step 2 Remove all parts and hardware from packing material. Wooden pieces should be placed on a non abrasive surface to prevent damage to the finish Step 3 Lay Metal Frame Assembly (A) on a non abrasive surface. Attach Shelf (B) to Metal Frame (A) using 16-M6x35MM Hex Bolts (C).
PAGE 3
Step 4 Position Wall Storage in desired location. Mark holes where metal frame will be attach to wall. If possible, attach the Wall Storage to a stud (when possible) behind drywall using 6-4x60MM Wood Screws (D). NOTE: If hole locations do not align with stud, install the Drywall EZ Anchors (F). Tap the EZ Anchor into the drywall up to the thread. Using a Phillips head screw driver, secure the EZ Anchor in the drywall at the desired locations.