Installation & Assembly

Cleaning & Care:
Clean with soft cloth and a mild detergent.
Do not use abrasive cleaner.
Page 3 of (3)
3.)
Step.3:
Run a bead of silicone sealant
along the edge of the backplate to
prevent water intrusion.Leave a gap
at the bottom to allow moisture to
escape. Attach the fixture to the
mounting bracket(E) using screws(C)
provided.
4.)
Step.4:
Install medium base Edison-style
bulb(not included) into socket.
5.)
Step.5:
Attach shade(B) to the body(A)
and tighten screws(D) on the
sides of the fixture to secure.