Assembly Instructions

Assembly Steps

Step 4

Turn the cabinet right way up carefully.

Put the Drawer on to the Cabinet, then locked the Drawer as shown in the picture.

Ensure that all bolts of the Cabinet and the Handle of the Drawer are fully driven in and

locked in.

The cabinet now is ready to be used.

Caution: This Cabinet can only be used on a flat, level surface.

Step 3

Step 3.1

Step 3.2

Step 3.1: Using by Allen Key ( ), take out the Handle which put in the Drawer as shown in

picture.

Step 3.2: To affix the Drawer, align the bolt mounting position of the Handle to the mounting

positions at the Drawer.

Insert the Bolts through the mounting position and affix the Handle by the Allen Key ( ), as

shown in picture.