Assembly Instructions

ManualsBrandsTrent Austin Design ManualsFurnitureHarrah's 1 Drawer Nightstand

CABINET

CAUTION: You must read this before you proceed.

CAUTION : This Cabinet is NOT a TOY. Keep your child / children at bay in the

process of assembly.

For turning / flipping the cabinet and to prevent damage to the cabinet, 02

persons may be needed to execute this action.

Summary of content (6 pages)

PAGE 1
Assembly Instructions CABINET CAUTION: You must read this before you proceed. CAUTION : This Cabinet is NOT a TOY. Keep your child / children at bay in the process of assembly. For turning / flipping the cabinet and to prevent damage to the cabinet, 02 persons may be needed to execute this action.
PAGE 2
Parts List No. Picture Description Qty A Cabinet 1 B Legs, prefitted with wooden dowels 4 Description Qty 1 Long Bolts (M6 x 110mm) 5 2 Short Bolts (M6 x 20mm) 1 3 Allen Key 1 4 Washer Ring 3 Hardware Cabinet Hardware No. Picture Assembly Preparation Before Beginning Assembly: Read instructions, cover to cover. Have 2 adults on hand for assembly. Do not assemble on flooring or carpet. Assemble on a clean non-marring surface (packing foam). Save all packaging until finished.
PAGE 3
Assembly Steps OVERVIEW Cabinet (A) FRONT FACING Legs, prefitted with wooden dowels (B) This Cabinet has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Cabinet parts, the above picture is to help you put the various parts into perspective. Please read through the instructions herebelow to familiarise the parts and steps before assembly. Step 1 Unpack and place all parts on a clean, non-marring surface.
PAGE 4
Assembly Steps Step 2 3 B A 1 4 Place the Cabinet (A) upside down. Align and insert the four (04) Leg with prefitted Dowel & Bolt of the Leg (B) to the mounting positions at the Cabinet bottom corners. Insert the Long Bolts ( 1 ) through the mounting position and affix the Leg (B) using the Allen Key ( 3 ). The use of Washer Rings ( 4 ) are optional and are especially useful to help alleviate slight wobble.
PAGE 5
Assembly Steps Step 3 3 3 Step 3.1 Step 3.2 Step 3.1: Using by Allen Key ( 3 ), take out the Handle which put in the Drawer as shown in picture. Step 3.2: To affix the Drawer, align the bolt mounting position of the Handle to the mounting positions at the Drawer. Insert the Bolts through the mounting position and affix the Handle by the Allen Key ( 3 ), as shown in picture. Step 4 Turn the cabinet right way up carefully. Put the Drawer on to the Cabinet, then locked the Drawer as shown in the picture.
PAGE 6