Installation Instruction

1A
Install the Fixture
2
Align the holes on the shade with the holes on the shade base and secure it with the shade screws. Repeat for all shades.
Screw the lamps into the sockets. Refer to the label on the socket for Max Wattage Information.
Determine the wanted height or look of the fixture with the provided stems and assemble them by screwing them together.
Feed the fixture wires through the stems and screw the assembly to the fixture.
Unscrew the collar nut off the screw collar and place it onto the stem followed by the canopy.
If necessary, screw the threaded nipple tightly onto the mounting plate.
Feed the fixture wires through the threaded nipple and screw the mounting plate assembly onto the stem/chain assembly.
Align and secure the mounting plate to the junction box.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire (square and/or rigid) to the neutral power line wire with a wire nut.
Connect the black fixture wire (round and/or smooth) to the hot power line wire with a wire nut.
Neatly place all the wires into the junction box, place the canopy onto the ceiling, and secure it in place by screwing the collar nut
tightly onto the screw collar.
1
2
3
4
5
6
7
8
9
10
11
12
SHADE
CANOPY
9
3
3
STEM
SHADE BASE
SOCKET
7
JUNCTION BOX
MOUNTING PLATE
THREADED NIPPLE
SCREW COLLAR
COLLAR NUT
10
11
SHADE SCREW
1
2
4
LAMP
3