Installation & Assembly

2
1A
Secure the mounting plate to the junction box.
Connect the fixture to a suitable ground in accordance to local electrical codes.
Connect the white fixture wire to the neutral power line wire with a wire nut.
Connect the black fixture wire to the hot power line wire with a wire nut.
Align the holes on the shade with the holes on the shade base and secure it in place with the shade screws. Repeat
for remaining shades.
Screw the lamp(s) into the socket(s). Refer to the label on the socket for Max Wattage Information.
Neatly place the wires into the junction box, mount the fixture base onto the mounting plate studs, and secure it
with the two cap nuts.
1
2
3
4
5
Install the Fixture
6
7
5
CAP NUT
FIXTURE BASE
SHADE
LAMP
SHADE BASE
7
6
3
4
JUNCTION BOX
NEUTRAL WIRE
HOT WIRE
WHITE WIRE
BLACK WIRE
MOUNTING
PLATE STUD
MOUNTING
PLATE
SHADE SCREW
1
1