Assembly Instructions

1. Carefully place the headboard (#1) onto the top of the H/board legs (#2).

2. Prepare 6 bolt assemblies by applying a lock washer (#C) onto the bolt (#A)

then a flat washer (#D) onto that same bolt (#A). Insert 3 bolt assemblies into

each end of the headboard (#1) and secure using the Allen wrench (#E).

1. Insert 2 threaded studs

(#G) into the holes along

the sides of the headboard

(#1) and footboard (#4).

Turn right to tighten.

2. Apply the each

end of the side

rails (#5) onto

those threaded

studs (#G).

3. Apply a hex nut (#H)

then a beveled

washer (#I) onto the

threaded studs (#G).

Secure the washer

using the wrench (#J).