Assembly Instructions

A
REMOVE ALL PARTS FROM PACKAGE, BE CAREFUL NOT TO DAMAGE ANY COMPONENTS
Measure area and determine desired hanging height.
1.
3.
2.
P
roduct comes with three [3] 12”, one [1] 8” and one [1]
4” hard stems [A] for adjustable hanging height. Deter-
mine the stems you will use to achieve desired height.
(Threads are removable from the stems, and thread
removal may make it easier to thread wire.)
Thread wire [E] from socket part [B] through first stem
[A]. Continue to add stems, threading the wire and
screwing each stem together. Repeat as necessary to
achieve desired hanging height.
Detach mounting plate [C] from canopy [D]. Thread wire
[E] through canopy.
4.
Mounting plate [C] will attach to ceiling junction box.
5.
6.
Remove socket ring [H] from socket. Install the glass
shade [G] onto socket part [B] and tighten by turning
socket ring [H]. Install bulb 60W max (not included)
7.
Note: Turn off switch before replacing the bulb. Make sure the bulb has sufficient time to cool down.
Do not subject the lamp to any shock while lit as shattering of glass shade may result.
C
D
E
B
G
A
F
C
D
B
G
E
F
x2
H
H
SINGLE PENDANT
Install light to ceiling. We recommend installation by a
qualified electrical professional. Canopy nuts [F] are
used to tighten light to ceiling.