ASSEMBLY INSTRUCTION CHARCOAL FINISH METAL AND WOOD KITCHEN A Leg Wine Glass Bottom Frame IE Top Frame Holder Frame 4 pcs 1pc 1pc E Top Panel Bottom Panel . Nut Bolt (Sal) (Big) 1pc 1pc 16 pcs 16 pcs l] Bolt 5352 ' Wine Rack Whe% Emm @m < 2 pcs 12 pcs 1pc 4 pcs Washer N Open End @ Allen Wrench Wrench pcs 1pc 1pc This page lists all the contents included in the box. Please take the time fo identify the hardware as well as the individual components to this product.
1 Assemble leg (A) and top frame (D) as shown in drawing with bolt (H) and nut {(G) ,fastening it up by use of Allen wrench (O). Then install wine cup holder frame (B) with screw (J) .and place bottom frame (C) on the comer panel to assemble with bolt (H) and nut (G). 0 == X1pc J X 4 pcs 2 Install wheel (L) in the bottom of leg {A) as shown in drawing with washer (M) then tighten by open end wrench (N).
Assemble top panel (E) and bottom panel (F) to wine glass holder frame (B) and bottom frame (C) respectively with bolt (J) as shown in drawing. Then tighten up with Allen wrench (o). 0 == X1pc J X 8 pcs Upright the bar cart and install wine rack (K) on the bottom panel {F) with bolt {I) and fasten up with Allen wrench (O). 0 == X1pc | X 2 pes Cleaning & Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry or damp soft cloth.
