Installation & Assembly

Part List

Hardware List

Side Rail

2 pcs.

Stretcher

3 pcs.

Hex Wrench

1 pc.

Twin Bed Rails

M6x15

Head Cap Bolt

12 pcs. (+1 extra)

Spring Washer

12 pcs. (+1 extra)

Flat Washer

12 pcs. (+1 extra)

IMPORTANT NOTE

Carefully remove all the parts from the carton and put

them individually on a soft cloth to prevent scratches

or other damage occurring to the parts.

We have taken great care in the design of this

product and request that you carefully and strictly

follow our assembly instructions to ensure

a completed product as it was designed.

Small Hex Wrench

1 pc.

M8x15

Head Cap Bolt

(large)

8 pcs. (+1 extra)

Spring Washer

(large)

8 pcs. (+1 extra)

Flat Washer

(large)

8 pcs. (+1 extra)

PAGE 1
Twin Bed Rails IMPORTANT NOTE. Carefully remove all the parts from the carton and put them individually on a soft cloth to prevent scratches or other damage occurring to the parts. We have taken great care in the design of this product and request that you carefully and strictly follow our assembly instructions to ensure a completed product as it was designed. Part List H. Side Rail 2 pcs. I. Stretcher 3 pcs. Hardware List Small Hex Wrench 1 pc. Hex Wrench 1 pc. M8x15 Head Cap Bolt (large) 8 pcs.
PAGE 2
Assembly Instructions 2/2 IMPORTANT * Do not tighten all the Head Cap Bolts until each part is properly assembled. * You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future. * Use a soft cloth between these parts and the floor. STEP 1 Assemble Side Rails (H) to Headboard and Footboard with Flat Washers (large), Spring Washers (large) and Head Cap Bolts (large), tightening the bolts only half way.