Installation & Assembly

page 2
FLUSHMOUNT
Assembly Instructions
STEP 2
Make the electrical connection from the junction box to the
fixture. Connect the ground wire to the mounting unit using
the preinstalled green ground screw. Then, connect the
positive, negative and ground wires with the supplied wire
nuts. Secure with electrical tape
Connect Clear, Brown, Gold or
Black Parallel Wire without tracer
(round & smooth) or Black Fixture
Wire to:
Black or Red Supply Wire or
Insulated Wire (other than green)
with copper conductor.
Connect Clear, Brown, Gold or
Black *Parallel Wire with tracer
(square & ridged) or White Fixture
Wire to:
White Supply Wire or Insulated
Wire (other than green) with silver
conductor
Copper
Silver
Smooth
Ridged
STEP 1
Use the mounting screws to attach the mounting unit to
the junction box
STEP 3
Install bulbs (not included). Place the fixture and shade over
the mounting unit and secure the assembly with the finial.