Installation & Assembly

STEP 1
Screw the rods to the fixture. Make sure to feed
the branchwires of the fixture through the rods
during assembly. Remove or add rods to adjust
the height.
STEP 2
Use the mounting screws to attach the mounting unit to the
junction box
STEP 3
Make the electrical connection from the junction box to the
fixture. Connect the ground wire to the mounting unit using the
preinstalled green ground screw. Then, connect the positive,
negative and ground wires with the supplied wire nuts. Secure
with electrical tape
page 2
CHANDELIER LIGHT (ROD)
Assembly Instructions
Connect Clear, Brown, Gold or
Black Parallel Wire without tracer
(round & smooth) or Black Fixture
Wire to:
Black or Red Supply Wire or
Insulated Wire (other than green)
with copper conductor.
Connect Clear, Brown, Gold or
Black *Parallel Wire with tracer
(square & ridged) or White Fixture
Wire to:
White Supply Wire or Insulated
Wire (other than green) with silver
conductor
Copper
Silver
Smooth
Ridged