Assembly Instructions

Assembly Instructions 2/2
IMPORTANT
 Use a soft cloth between these parts and the floor.
 Do not use power tools above 8 volts to assemble.
 Do not tighten all the bolts until each part is properly assembled.
 The unit must be level to work properly. Use the included adjustable levelers to level.
 Keep Hex Wrench in a safe place as the bolts may need to be tightened up in the future.
Figure 1
STEP 1
Attach Legs (C) to Apron (B)
with Head Cap Bolts, tightening
the bolts only half way.
(See Figure 1)
Tighten all bolts used in this step.
C
C
C
C
B
B
B
B
Head Cap Bolt
STEP 2
Place Top (A) upside down on a soft cloth.
Attach unit to Top (A) with Wood Screws.
Turn unit over to its’ upright position.
Level unit by adjusting the adjustable
levelers on the bottom of legs.
(See Figure 2)
Note: Unit must be level to work properly.
Figure 2
A
Wood Screw