Assembly Instruction Sheet

4of4
STEP 5 Make Wire Connections-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Outlet Box to White
Wire from fixture.
C. Connect Black (or Red) Supply Wire from the Outlet Box
to Black Wire from fixture.
D. Connect Ground Wire from the Outlet Box to Ground
Wire from fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
Figure 6
White wire from supply White wire from fixture
Black wire from supply
(or Red)
Black wire from fixture
Ground wire from supply Ground wire from fixture
STEP 6 - Attach Ceiling Canopy to Nipple
A. Pass the Ceiling Canopy over the end of the Nipple (B).
Secure by Mounting Ball (E) onto the Nipple (B). Hand
tighten until snug.
Mounting Ball
Ceiling
Canopy
Figure 7
Figure 5
Crossbar
Nipple
STEP 7 Install Bulb-
A. This fixture uses standard 60W bulb (supplied) with a
standard screw base. Maximum 100 watts.
B. Insert bulb and screw properly into place.
Your fixture is now assembled and ready to use.
Enjoy!
Bulb
Socket
Figure 8
Assembly Instruction Sheet