ASSEMBLY INSTRUCTION METAL TWIN BED Headboard [ Footwear Bar M ceramics 1pc 1pc 1pc PCs E Slats E Extension leg Bolt m Alt 1/4" 57mm 1/4" 44mm PCs PCs apes Bps I ot Nut Fiat washer Allen wrench 4x4mm f S & PCs PCs 22pcs 1pc Wrench 11.3mm 1pc This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly,place the contents on a carpeted or padded area to protect them from damage.
Assemble the headboard (A) to the extension leg (F) with PCs bolts (1) and PCs flat washer (K), then fastened using Allen wrench (L). Assemble bar (C) to the extension leg (F) with 2 pcs bolts (G), then fastened using Allen wrench (L).
Assemble the side rail (D) to the extension leg (F) and the foot board (B) with PCs bolts (G), spices bolts (1), PCs nuts (J), and spices flat washer (K), then fastened using Allen wrench (L) and wrench (M). Assemble the slat (E) to the side rail (D) with 1pc bolt (H), 1pc nut (J) and PCs flat washer (K) for each end of slat (E), then fastened using Allen wrench (L) and wrench (M). AN Cleaning & Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant.
