ASSEMBLY INSTRUCTION METAL KING BED Headboard I Footwear Bar X scare 1pc 1pc 1pc apes E Fiats Extension leg Support leg m Bolt 1/4" 57mm PCs PCs PCs PCs I ot Bolt Nut Fiat washer 1/4" 44mm & &) PCs apes PCs 28pces Allen wrench Wrench 4xdmm 11.3mm 1pe 1pe damage. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
Assemble the headboard (A) to the extension leg (F) with PCs bolts (J) and PCs flat washer (L), then fastened using Allen wrench (M). Assemble bar (C) to the extension leg (F) with PCs bolts (H), then fastened using Allen wrench (M).
Assemble the side rail (D) to the extension leg (F) and the foot board (B) with 4 pcs bolts (H), 4 pes bolts (J), apes nuts (K), and 8 pes flat washer (L), then fastened using Allen wrench (M) and wrench (N). Assemble the slat (E) to the support leg (G) with 1pc bolt (1) and 1pc flat washer (L) for each support leg (G), then fastened using Allen wrench (M).
Assemble the slat (E) to the side rail (D) with 1pc bolt (1), 1pe nut (K) and 2 pes flat washer (L) for each end of slat (E), then fastened using Allen wrench (M) and wrench (N). Cleaning & Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all connections are tight.
