ASSEMBLY INSTRUCTION METAL FULL BED Headboard X Foot board Bar sadder 1pc 1pc 1pc PCs E Slats E Extension leg Support leg m Bolt apes apes apes apes I 5o Bolt Nut Flat washer & ® PCs PCs PCs PCs Alien wrench 4xdmm 11.3mm 1pe 1pc damage. This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product.
Assemble the headboard (A) to the extension leg (F) with PCs bolts (J)and PCs flat washer (L), then fastened using Allen wrench (M). Assemble the bar (C) to the extension leg (F) with PCs bolts (H), then fastened using Allen wrench (M).
Assemble the side rail (D) to the extension leg (F) and the foot board (B) with PCs bolts (H), PCs bolts (J), apes nuts (K), and apes flat washer (L), then fastened using Allen wrench (M) and wrench (N). Assemble the slat (E) to the support leg (G) with 1pc bolt (I) and 1pc flat washer (L) for each support leg (G), then fastened using Allen wrench (M).
) Assemble the slat (E) to the side rail (D) with 1 pc bolt (1}, 1pc nut (K) and 2 pcs flat washer {L) for each end of slat (E), then fastened using Allen wrench (M) and wrench (N). Cleaning & Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen aver time. Periodically check that all connections are tight.
