ASSEMBLY INSTRUCTION METAL QUEEN BED Headboard I Footwear Bar Ceramics 1pc 1pc 1pc PCs E Slats Extension leg Support leg m Bolt PCs N PCs PCs PCs Il Bot Bolt Nut Flat washer © PCs apes PCs pests Allen wrench Wrench 4x4mm 11.3mm = 1pc This page lists all the contents included in the box. Please take the time to identify the hardware as well as the individual components to this product. As you unpack and prepare for assembly,place the contents on a carpeted or padded area to protect them from damage.
Assemble the headboard (A) to the extension leg (F) with PCs bolts (J) and PCs flat washer (L), then fastened using Allen wrench (M). Assemble the bar (C) to the extension leg (F) with PCs bolts (H), then fastened using Allen wrench (M).
Assemble the side rail (D) to the extension leg (F) and the foot board (B) with PCs bolts {H), PCs bolts {J), PCs nuts (K}, and PCs flat washer (L), then fastened using Allen wrench (M) and wrench (N). p Assemble the slat (E) to the support leg (G) with 1pc bolt () and 1pc flat washer (L) for each support leg (G), then fastened using Allen wrench (M).
resemble the slat (E} to the side rail with 1 pe bolt (1), 1pc nut and PCs flat washer [ Assemble th (E) to the sid (D) with 1 pc bolt (1), 1 (K) and PCs fl hy (L) for each end of slat (E), then fastened using Allen wrench (M) and wrench (N). Cleaning & Care Treat surface with care. Surface is resistant to scratches but is not scratch resistant. Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Hardware may loosen over time. Periodically check that all connections are tight.
