Specifications

Fixture Finish: Rubbed Bronze
Glass/Shade Finish: Seeded Glass
Materials: Steel, Glass
Fixture Width: 7.25” 18.42cm
Fixture Height: 10.5” 26.67cm
Fixture Extension 8.5” 21.59cm
Glass Diameter: 7.25” 18.42cm
Glass Height: 6.25” 15.88cm
Canopy Backplate Dimensions: 4.875W x 8”H x 1”E 12.38cmW x 21.59cmH x 2.54cmE
Chain: N/A N/A
Rod: N/A N/A
Wire: 8”
Bulb Type: Incandescent, Type B No
Wattage: 1 x 60W(M)
Voltage: 110V
Install Position: Either up or down
Approved Location: Damp Location
Safety Rating: UL,CUL
1 Light Wall Sconce
JOB NAME _____________________________________________________________________
JOB TYPE _____________________________________________________________________
COMMENTS ___________________________________________________________________
Dimensions and specications are approximate and based on the most current information possible at the time of publication. We reserve the right to make design changes and modications without prior
notice. Our products are UL/CUL approved. Unless otherwise noted as pending, Wattages stated are the maximum recommended; however, lower wattages may be used. Bulbs are not included unless
otherwise noted. Larger xtures may require reinforced outlet boxes and additional support. Receipt or possession of this catalog does not constitute an agreement to sell.
A hand-painted Rubbed Bronze nish complements the textured Seeded Glass and
heightens the rustic industrial look of this Collection. These vintage-inspired xtures have a
unique convertible design that allows the xture to be mounted with the glass facing up or
down. This strikingly masculine collection is perfect for vintage farmhouse and industrial
decors. This 1-light wall sconce is a great accent that can be used alone or as a set.