Installation & Assembly

Page 2 of 2
07/30/09
TACKBOARD INSTALLATION (0PTIONAL):
NOTE:
If installing an optional intrinsic tackboard
clean the thermofused laminate surface
with a standard household cleaner before
application. The velcro tabs may not adhere
properly if the surface is not cleaned.
1. Determine mounting location on the hutch
back panel.
2. Clean surface with a standard household
cleaner.
3. Remove protective backer from velcro tabs
to expose adhesive.
4. Apply pressure to corners of tackboard to
adhere tackboard to hutch back panel.
INS429, REV D, ECN 11274 © Trendway Corporation, 2009. Printed in USA.