Quick Installation Guide TEW-424UB
Table ofofContents Table Contents English ..................................................................................................... 1. Before You Start ................................................................................ 2. How to Install .................................................................................... 3. Wireless Configuration ...................................................................... 1 1 2 6 Troubleshooting .........................................
1. Before You Start Package Contents TEW-424UB Utility & Driver CD-ROM Quick Installation Guide USB Cable System Requirements USB port: 1.1 or 2.0 CD-ROM Drive CPU: Intel Pentium 300MHz or above Memory: 256MB RAM or above Windows XP/2000/ME/98SE Application Workstation with 54Mbps Wireless USB 2.0 Adapter (TEW-424UB) Cable/ DSL Modem 54Mbps 802.
2. How to Install Important! DO NOT install the USB adapter in the computer until instructed to do so. Note: Refer to the User's Guide on the Driver CD-ROM for Windows 98SE and Windows ME installation instructions 1. Insert the Utility & Driver CDROM into your computer's CD-ROM Drive and then click Install Utility. 2. Follow the InstallShield Wizard instructions. Windows 2000 Windows XP 3. Click Continue Anyway. 3. Click Yes.
4. Click Finish. 5. Connect the wireless adapter to an available USB port on your computer. Windows 2000 Windows XP 6. Drivers will install automatically. 6. Select No, not this time, and then click Next.
Windows 2000 Windows XP 7. Click Install the software automatically (Recommended) and then click Next. 8. Follow the Found New Hardware Wizard instructions. 7. Click Yes. Then, Continue to Step 10 9. Click Continue Anyway.
10. Select the appropriate country domain and then click OK. 11. Click Yes. 12. Click Finish. Your installation is now complete. For detailed information regarding the TEW-424UB configuration and advanced settings, please refer to the User's Guide included on the Utility & Driver CD-ROM or TRENDnet's website at www.trendnet.
3. Wireless Configuration Note: If you are running Windows XP, you need to disable Wireless Zero Configuration. Please refer to question 4 of the Troubleshooting section. 1. On the bottom right-hand corner of the screen, double-click on the wireless LAN Configuration utility icon 2. Click Site Survey. 3. Click the SSID that matches your wireless access point and then click Connect. Wireless configuration is now complete.
Troubleshooting Q1: I inserted the Utility & Driver CD-ROM into my computer's CD-ROM Drive but the installation menu does not appear automatically. What should I do? A1: If the window does not appear automatically, click Start, click Run, and type D:\autorun.exe where "D" in "D:\autorun.exe" is the letter assigned to your CD-ROM Drive, and then press the ENTER key on your keyboard.
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.
TRENDnet Technical Support US . Canada Toll Free Telephone: 1(866) 845-3673 24/7 Tech Support Europe (Germany . France . Italy . Spain . Switzerland . UK) Toll Free Telephone: +00800 60 76 76 67 English/Espanol - 24/7 Francais/Deutsch - 11am-8pm, Monday - Friday MET Worldwide Telephone: +(31) (0) 20 504 05 35 English/Espanol - 24/7 Francais/Deutsch - 11am-8pm, Monday - Friday MET Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.
