Quick Installation Guide TPE-224WS
Table ofofContents Table Contents English ...................................................................................................... 1. Before You Start ................................................................................ 2. Hardware Installation ........................................................................ 3. Web Management Utility .................................................................... 1 1 2 3 Troubleshooting ...............................................
1. Before You Start Package Content TPE-224WS Quick Installation Guide Utility CD-ROM 2 mounting brackets with screws AC Power Cord System Requirements Web Browser: Internet Explorer (5.0 or above), Netscape (6.0 or above) Computer with Network adapter installed Application Advanced Wireless Pan & Tilt Internet Camera Server (TV-IP400W) Power over Ethernet (PoE) Splitter (TPE-102S) 108Mbps 802.11g Hot-Spot Access Point (TEW-453APB) 108Mbps 802.
2. Hardware Installation 1. Connect the Power Cord to the rear of the TPE-224WS and then to a power outlet. 2. Connect a CAT-5 network cable from the computer to an available Ethernet port of the TPE-224WS.
3. Web Management Utility Note: If you would like to easily discover all the Web Management Switches on the network, assign IP Address, change the password, and upgrade to new firmware, then install the Web Management Utility. Follow the steps below. For Windows User 1. Insert the Utility CD-ROM into your computer's CD-ROM Drive and then click Install Utility. 2. Follow the Installation Wizard instructions. Click OK. 3.
4. Click Discovery, and then doubleclick the Switch that appears in the Discovery List. 5. Click the Switch in the Monitor List and then click Configuration setting. 6. Configure the IP Address, Subnet mask, Gateway, and Password. Click Set.
. Click OK. 8. Click Web access. 9. Type in your Password and then click Login. For more information regarding the TPE-224WS configuration and advanced settings, please refer to the User's Guide included on the Utility CD-ROM or TRENDnet's website at www.trendnet.
Troubleshooting Q1: After connecting the TPE-224WS to a power outlet, the LEDs do not turn on. A1: Check the connection of the power cord to the TPE-224WS and the power outlet. Also check that the power outlet is receiving power. Q2: After installing the Web-Management Utility, I clicked Discovery and the Utility is unable to discover the TPE-224WS. What should I do? A2: Make sure that the TPE-224WS is powered on and that all connections are secure.
Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. TPE-224WS - 5-Year Warranty If a product does not operate as warranted above during the applicable warranty period, TRENDnet shall, at its option and expense, repair the defective product or deliver to customer an equivalent product to replace the defective item.
WARRANTIES EXCLUSIVE: IF THE TRENDNET PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMER’S SOLE REMEDY SHALL BE, AT TRENDNET’S OPTION, REPAIR OR REPLACEMENT. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
TRENDnet Technical Support US . Canada Toll Free Telephone: 1(866) 845-3673 24/7 Tech Support Europe (Germany . France . Italy . Spain . Switzerland . UK) Toll Free Telephone: +00800 60 76 76 67 English/Espanol - 24/7 Francais/Deutsch - 11am-8pm, Monday - Friday MET Worldwide Telephone: +(31) (0) 20 504 05 35 English/Espanol - 24/7 Francais/Deutsch - 11am-8pm, Monday - Friday MET Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.
