ar le English 1. Prepare for Installation 2.
English QIG Le Thank you for purchasing the TWH00-BRV204. This router will allow you to securely share your infer met connection, files, and other resources with multiple users. This guide will help you set up and configure your routs. Following the installation instructions should be quick and easy. If you run into problems, pleads refer to the Troubleshooting section or the more balladeer installation procedures on tha User's Guide.
Collect Internet Service Provider (ISP) Information During the installation of your router the Se-Up Wizard will ask you for pacific Internet Vicar Provider ISP information you should have bean provided from your ISP fo set up your Cable or DSL connection. The information is different based on your type of Interment Connection. Please verify your Internet Connection type and ensure you have the following information: Dynamite IP Cable Connection Nothing required.
pal LATTE 4. Tum off your Cablecast Modem, Router, and PC. 2. Connect one RI-45 network cable from the Modern's Theme port to the Routers WAN port, 3. Connect a different JR-45 network cable from one of the Router's LAN ports to your computer's network port. 4. Tum on your Cablecast modem. 5. Turn on your router. §. Tum on your computer. THB BRIBERY Verify Hardware Installation Verify that the following router front panel lights are on: Power, WAN, and ona LAN port.
3. Configure the computer's TCP/IP Settings This next section will ensure that your computer can communicate with your router. To do this, you will need to configure the TCP/IP settings in your Operating Stern (08). Configuration instructions for Windows 08-based computers are shown below. For computers running other operating systems, $88 your system documentation for configuration instructions. Win 95/98/98SE/ME 4. Find the Start Bunion located on the Desktop. 2.
5. Under the IP Address Tab, select Obtain an IP address automatically. §. Now go fo the Gateway tub and make sure no Gateways are sifted in the Installed Gateway's section. if there is Leeway installed, click Remove to Move it.
7. Go to thw DNS Configuration tab, and click Disable DNS. Then click OK. 8. Click OH on the TC PAP Properties box. $. Click OK on the Network Box, 10. At this point, the installation may require flea from your Windows CD-ROM. if this happens, insert your Windows 98 CD-ROM info your CD-ROM drive and select CD-ROM drive lo load the Tes, 44. After the files load and the "System Settings Change” message appears, click Yas fo reboot your system. Your computer will now lead your new TC PAP settings.
12. After your system reboots, click Start; click on Run. Then type windpipe in the field and then click OK. 13. The IP configuration box will appear. Choose your Network adapter from the drop down box (such as Trend net TE10C-PCIWN 10/100Mbps network adapter land the current IP address information of your computer will show in the box, including the following: IP Address, Subset Mask and Default 14.
Windows 2000/XP 4. Click Start; Drag Mouse to Settings and then click on Contra! Panel. 2, Double-click the Network Connections Leon, 3. Right-click on the Local Area Connection Icon, and then click on Properties. The Local Area Connection Properties box will appear. 4. Under the "General Configuration” Tab, locate and select TRAP and then click Proportions. The Interment Protocol (TC PAP) Properties box will appear.
8. Click OK. 7. Click Gloss on the Local Area Connection Properties box. 8, Click on Start; click on Run. Then type cmd and dick The Command Prompt window will appear. Type configure at the C:\ prompt and prose the Enter key. 10. ¥ your IP Address shows the following information your computer is now successfully convalesced to the router: IP Address: 192.168.0.x Subset Mask: 255.265.255.0 Default Gale's: 182.168.0.
ET The following set-up information is designed to help you to set-up your router to connect fo the Intestine. The set-up is different depending upon the type of Interest Connection you have with your ISP. If you're not sure what ype of connection you have pleas canto your Inflate Service Provider and collect tha required information, which is locales in the “Prepare for Installation” session at the beginning of this Quick Installation Guide.
fa tic or Fixed IP f connection 4. Launch your interment browser (Explorer or Capstan, and then type in the address bar and hit the Enter key. The TW100-BRY204's configuration page should appear. 2. Click on the Internet Option on the Sift-hand side of the screen and select WAN Port. The WAN Port configuration page will appear. 3. Select the Specified IP Address, (Static IP Address) and the information provided by your ISP, and lick Save. 4.
Poe DSL Connection 4. Launch your Internet browser (Explorer or Netscape), and then type hitp192.168.8.1 In the address ber and hit the Enter key. The TW100-BRV204's configuration page should appear. 2, Click on the Internet option on the left-hand side of the screen and select WAN Port. The WAN Port configuration page will appear. 3. Select POE for the Login Method; the User Name/Password field will appear. Enter POE User Name and Password, and click Save. a 4.
WEPT DSL Connection 1. Launch your web browser, {Internet Explorer or Netscape Navigator), type in the address bar, and hit the Enter key. The Twi00BRV204's configuration page should appear. 2. Click on the Internet option on the pilaf-hand side of the screen and select WAN Port. The WAN Port configuration page will appear. ate 3, Select PPR for the Login Method, and the User Name/Password field wil appear. Enter your User Name/Password under PT and then click Save.
MAC A, | connection 4. Launch your Internet browser (Explorer or Capsize, types in the address bar, and hil the Enter key. The TW100-BRV204's configuration page should appear. 2. Click the internet option on the fell side of the screen, and select WAN Port. The WAN Port configuration gaps will appear. Sa NOTE: 1 ihe registered MAC Addie's your ISP gave vou is different than your PC's MAC Address, oles inter lhe registered MAC Address for your account, and dick Save. 4.
ELF For advanced features such as URL Filtering, Access Control, YPN Tunneling, ete. please refer to the User's Guide located on your CD-ROM for configuration Instructions. Gl. 1 specified the IP address, 192.168.0.1 In my Interment browses, but the bower comes back with “Ths page cannot be displayed”. How can | get info the TW130BRY204 web configuration page? A.
