FAQ

ManualsBrandsTRENDnet ManualsNetwork RouterTW100 BRV204

Q: How do I configure the TW100-BRV204/304 for a DSL, PPPoE connection?

Step 1. Open your web browser and type the IP address of the TW100-BRV204/304 in the

address bar. The default IP address is 192.168.0.1. At the login, enter your username

(blank) and password (blank).

Step 2. Click on Internet then WAN Port on the left hand side.

TW100-BRV204/TW100-BRV304 F.A.Q.

Step 3. Choose PPPoE for the Login Method in the Login section.

Step 4. Enter your Username and Password provided by your ISP (Internet Service Provider).

Step 5. Click Save.

Step 1.

Step 2.

Step 3.

Step 4.

Note: After you save the settings you may need to power cycle the modem and router.

Disconnect the power cycle from the modem and router.

Wait approximately 15 seconds.

Reconnect the modem first and wait for it to boot up.

After the modem has booted up reconnect the router.

Summary of content (20 pages)

PAGE 1
TW100-BRV204/TW100-BRV304 F.A.Q. Q: How do I configure the TW100-BRV204/304 for a DSL, PPPoE connection? A: Step 1. Open your web browser and type the IP address of the TW100-BRV204/304 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). Step 2. Click on Internet then WAN Port on the left hand side. Step 3. Choose PPPoE for the Login Method in the Login section. Step 4.
PAGE 2
TW100-BRV204/TW100-BRV304 F.A.Q. Q: How do I configure the TW100-BRV204/304 for a Cable connection using a Dynamic IP Address? A: Note: The default setting of the router is configured for a Cable connection using a Dynamic IP Address. Step 1. Open your web browser and type the IP address of the TW100-BRV204/304 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). Step 2. Click on Internet then WAN Port on the left hand side Step 3.
PAGE 3
TW100-BRV204/TW100-BRV304 F.A.Q. Q: How do I configure the TW100-BRV204/304 for a Cable connection using aStatic IP Address? A: Step 1. Open your web browser and type the IP address of the TW100-BRV204/304 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). Step 2. Click on Internet then WAN Port on the left hand side Step 3. Choose None (Direct Connection) for the Login Method in the Login section. Step 4.
PAGE 4
TW100-BRV204/TW100-BRV304 F.A.Q. Q: How do I change the username & password on my TW100-BRV204/304? A: Step 1. Open your web browser and type the IP address of the TW100-BRV204/304 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). Step 2. Click on Security then Admin Login on the left hand side. Step 3. Enter in the desired username and password. Step 4. Click Save.
PAGE 5
TW100-BRV204/TW100-BRV304 F.A.Q. Q: How do I change the IP Address of my TW100-BRV204/304? A: Step 1. Open your web browser and type the IP address of the TW100-BRV204/304 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). Step 2. Click on LAN on the left hand side. Step 3. Change the IP address in the IP Address field. Q: How do I configure the TW100-BRV204/304? A: Step 1. Click Start then click on the Control Panel.
PAGE 6
TW100-BRV204/TW100-BRV304 F.A.Q. Step 4. Highlight the Internet Protocol (TCP/IP) by single clicking on it then click on Properties. Step 5. Select Obtain an IP address automatically and Obtain DNS server address automatically then click OK.
PAGE 7
TW100-BRV204/TW100-BRV304 F.A.Q. Step 6. Click OK again. Step 7. Your computer is now ready to access and configure the TW100-BRV204/304. Step 8. Open your web browser and type the IP address of the TW100-BRV204/304 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). Q: Where can I find the MAC Address of my TW100-BRV204/304? A: The MAC Address can be found on a label on the bottom of the router.
PAGE 8
TW100-BRV204/TW100-BRV304 F.A.Q. Step 2. Click on LAN at the top of the page. Step 3. The MAC address is listed next to the WAN Port MAC Address field. Q: How do I configure a VPN tunnel when one side has a dynamic IP address? A: Use the following screenshots as a guide. Scenario PC1 (192.168.1.x)-BRV204 (dynamic) ~ BRV304 (64.11.212.22)–PC 2 (192.168.2.x) Simply match both ends information. After the connections are created, 192.168.1.x should be able to ping 192.168.2.x. Important Note: 1.
PAGE 9
TW100-BRV204/TW100-BRV304 F.A.Q.
PAGE 10
TW100-BRV204/TW100-BRV304 F.A.Q. Settings on BR304 Q: How do I configure a VPN tunnel when both sides having static IP addresses? A: Use the following screenshots as a guide. Scenario PC1 (192.168.1.x)-BRV204 (dynamic) ~ BRV304 (64.11.212.22)–PC 2 (192.168.2.x) Simply match both ends information. After the connections are created, 192.168.1.x should be able to ping 192.168.2.x.
PAGE 11
TW100-BRV204/TW100-BRV304 F.A.Q.
PAGE 12
TW100-BRV204/TW100-BRV304 F.A.Q. Settings on BR304 Q: How do I connect using a the Microsoft VPN Client? A: Step 1. Open your web browser and type the IP address of the TW100-BRV204/304 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank).
PAGE 13
TW100-BRV204/TW100-BRV304 F.A.Q. Step 2. Click Microsoft VPN then Server on the left hand side. Place a check mark in Enable PPTP (VPN) Server then click Save. Step 3. Click on Clients on the left hand side. Place a check mark in Allow connection. Add a Login Name and Login Password, verify the password and click Add as a new User.
PAGE 14
TW100-BRV204/TW100-BRV304 F.A.Q. Step 4. From a remote client. Click Start>Run and type in ”ncpa.cpl”, without the quotes then click OK. Step 5. Click Create a new connection. Step 6. Click Next.
PAGE 15
TW100-BRV204/TW100-BRV304 F.A.Q. Step 7. Select Connect to the network at my workplace then click Next. Step 8. Select Virtual Private Network connection then click Next.
PAGE 16
TW100-BRV204/TW100-BRV304 F.A.Q. Step 9. Enter in a name for the connection then click Next. Step 10. Select Do not dial the initial connection then click Next.
PAGE 17
TW100-BRV204/TW100-BRV304 F.A.Q. Step 11. Enter the Public IP address of the TW100-BRV204/304 into the Host name or IP address field then click Next. Note: Do not enter in the IP address that is in the screenshot. That is an example only. You will use the Public IP address of the router that you are connecting to. Step 12. Select My use only then click Next.
PAGE 18
TW100-BRV204/TW100-BRV304 F.A.Q. Step 13. Place a check mark into Add a shortcut to this connection to my desktop if you want a shortcut then click Finish. Step 14. Enter the Username and Password that you configured on the TW100-BRV204/304 then click Connect.
PAGE 19
TW100-BRV204/TW100-BRV304 F.A.Q. Q: How do I forward ports in my TW100-BRV204/304? A: Well Known Ports Step 1. Open your web browser and type the IP address of the TW100-BRV204/304 in the address bar. The default IP address is 192.168.0.1. At the login, enter your username (blank) and password (blank). Step 2. Click Security then Firewall Rules on the left hand side. Step 3. Select WAN=>LAN in the drop down menu in the View Rules for category. Step 4. Click Add. Step 5. Give the rule a name.
PAGE 20
TW100-BRV204/TW100-BRV304 F.A.Q. Note: For a custom service you must add the service first. Step 1. Click Security then Services on the left hand side. Step 2. Enter in a Name, Type, Start and Finish ports then click Add.