User's Guide

- 58 -
4.8.4 Event Configuration >> Schedule Trigger
You can separately configure the schedule for trigger function of the
device by Email Schedule, FTP Schedule, or Network Storage Schedule.
Select the Enable option on each item, and then select a Schedule
Profile from the pull-down list and set the Interval time.
NOTE If the setting value of the Storage Recording Time Per Event option
in General Setting is longer than the Interval time in Network
Storage Schedule, the recorded file will be a continuous video clip.
For example, if you set the Storage Recording Time Per Event as 10
seconds and the Interval as 5 seconds, recorded file becomes a
non-stop video clip because the device will record a 10-second
video clip every 5 seconds.