Quick Installation Guide

ManualsBrandsTRENDnet ManualsNetwork EquipmentSingle Channel Analog to IP Video Encoder

TV-VS1

TV-VS1P

1.01

Summary of content (15 pages)

PAGE 1
Quick Installation Guide TV-VS1 TV-VS1P 1.
PAGE 2
Table of Contents English 1. Before You Start 2. Hardware Installation 3. Configure the TV-VS1/TV-VS1P 4. Power over Ethernet (PoE) Installation 1 1 2 3 6 Troubleshooting 8 Version 05.13.
PAGE 3
1. Before You Start Package Contents ŸTV-VS1/TV-VS1P ŸMulti-Language Quick Installation Guide ŸCD-ROM (Utility & User's Guide) ŸNetwork Cable (1.5m / 5ft) ŸGPIO Connector ŸAudio Y Cable (3.5mm Jack) ŸPower Adapter (12V DC, 1.5A) ŸMounting Accessories System Requirements ŸA computer with a wired network adapter properly installed ŸCD-ROM Drive ŸVGA Resolution: 800 x 600 or above ŸWeb Browser: Internet Explorer (6.
PAGE 4
2. Hardware Installation 1. Connect the provided network cable from one of your Router's network ports to the Ethernet port on the TV-VS1/TV-VS1P. 2. Connect one end of a BNC cable to the Video IN (Input) connector on the TV-VS1/TV-VS1P. Connect the other end of a BNC cable to the Video OUT (Output) connector on your analog camera. 3. Connect the Power Adapter to the TV-VS1/TV-VS1P and then to a power outlet.
PAGE 5
3. Configure the TV-VS1/TV-VS1P 1. Insert the Utility CD-ROM into your CD-ROM drive. 2. Click Run autorun.exe (Windows 7/Vista only). 3. Click IP Setup. 4. Follow the Installation Wizard instructions. 5. Once installation is complete click Close. 6. Click the Start (Windows XP) or Windows (Windows 7/Vista ) icon. 7. Go to Programs Ž TRENDnet Ž IPSetup and click IPSetup.
PAGE 6
Note: By default, the IP setting on the TV-VS1/TV-VS1P is set to DHCP. If you want to give the TV-VS1/TV-VS1P a static IP address, please refer to the User's Guide on the Utility CD-ROM. 8. Double click the Video Encoder to access the browser configuration. Verify that the MAC address listed matches the MAC address on your Video Encoder. The MAC address is listed on the bottom of the TV-VS1/TV-VS1P. Click Search if no Video Encoder is detected. 9. Enter the User name and Password, and then click OK.
PAGE 7
12. Click Install. 13. Live video will now appear. Your configuration is now complete For detailed information regarding the TV-VS1/TV-VS1P’s configuration and advanced settings, please refer to the Troubleshooting section, User's Guide CD-ROM, or TRENDnet's website at http://www.trendnet.com. Register Your Product To ensure the highest level of customer service and support, please take a moment to register your product Online at: www.trendnet.
PAGE 8
4. Power over Ethernet (PoE) Installation Note: This section is for the TV-VS1P only. Using the TV-VS1P with a PoE switch Power Internet Power Jack Power + Data (PoE) Data TV-VS1P TPE-80WS TEW-639GR 1. Connect a network cable from the Power over Ethernet switch (e.g. TPE-80WS) to the network port on the TV-VS1P. Then, follow the steps in Section 3: Configure the TV-VS1/TV-VS1P.
PAGE 9
Using the TV-VS1P with a PoE Injector Power Power Jack Internet Power + Data (PoE) Data TV-VS1P TPE-111GI TEW-639GR 1. Connect one end of the Power Cord to the Injector. Then connect the other end of the Power Cord to an outlet. 2. Connect a network cable from a switch or router to the TPE-111GI's Data In port. 3. Connect a network cable from the TV-VS1P to the TPE-111GI's PoE Out port. 4. Follow the steps in Section 3: Configure the TV-VS1/TV-VS1P.
PAGE 10
Troubleshooting 1. I inserted the Utility CD-ROM into my computer's CD-ROM Drive but the installation menu does not appear automatically. What should I do? 1. For Windows 7, if the installation menu does not appear automatically, click on the Windows Icon on the bottom left hand corner of the screen, click the “Search programs and files” box, and type D:\autorun.exe, where “D” in “D:\autorun.exe” is the letter assigned to your CD-ROM Drive, and then press the ENTER key on your keyboard . 2.
PAGE 11
PAGE 12
GPL/LGPL General Information This TRENDnet product includes free software written by third party developers. These codes are subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of the developers. TRENDnet does not provide technical support for these codes. The details of the GNU GPL and LGPL are included in the product CD-ROM. Please also go to (http://www.gnu.org/licenses/gpl.
PAGE 13
GPL/LGPL informações Gerais Este produto TRENDnet inclui software gratuito desenvolvido por terceiros. Estes códigos estão sujeitos ao GPL (GNU General Public License) ou ao LGPL (GNU Lesser General Public License). Estes códigos são distribuídos SEM GARANTIA e estão sujeitos aos direitos autorais dos desenvolvedores. TRENDnet não presta suporte técnico a estes códigos. Os detalhes do GNU GPL e do LGPL estão no CD-ROM do produto. Favor acessar http://www.gnu.org/licenses/gpl.txt ou http://www.gnu.
PAGE 14