Datasheet

TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at any time,
without notice. For the most recent product information please visit http://www.trendnet.com Copyright ©TRENDnet.All Rights Reserved.
TECHNISCHE SPEZIFIKATIONEN
ALLGEMEIN
Video Videoeingang: CVBS / 1 Vp-p±0.2 / 75 Ohms ; BNC Anschluss
Videoausgang: CVBS /1 Vp-p /75 Ohms; BNC Anschluss
Audio Line In: 3,5 mm Mikrofon-Eingang/Ausgang
Line Out: 3,5 mm Audio-Eingang/Ausgang
S/N-Verhältnis: < 60dB
Codec: PCM/AMR
Zwei-Wege Audio
GPIO Masse, allgemeiner Ein-/Ausgang, DV12V Ausgang, RS485 TX+/TX-
SD-Kartenslot Unterstützt SD/SDHC (bis zu 32GB)
Schwenk-/Neigekopf und
Zoomfunktion
Protocol: Pelco D
Voreingestellte Positionen: 32
Auto Patrol
HARDWARE
Netzwerk IEEE 802.3u 10/100 Mbits/s Fast Ethernet, Auto-MDIX
LED
Stromversorgung , Link
Rücksetztaste Für Neustart drücken und loslassen
5 Sekunden lang für Zurückstellen auf Werkseinstellungen gedrückt halten
Stromverbrauch 7 Watts
Stromversorgung 12V, 1.5A Externes Netzteil
Abmessungen 160 x 109 x 36 mm (6.3 x 4.3 x 1.4 Zoll)
Gewicht 430 g (15.2 oz.)
Temperatur Betrieb be: 0°C ~ 45°C (32°F ~ 113°F)
Lagerung: -15°C ~ 60°C (5°F ~ 140°F)
Luftfeuchtigkeit Max. 85% (nicht kondensierend)
Zulassungen
CE, FCC
SYSTEMANFORDERUNGEN
Verwaltungsoberfl äche Internet Explorer 6.0 oder höher
Utility starten Windows 7(32/64-bit), Vista(32/64-bit), XP(32/64-bit)
Netzwerkprotokolle TCP/IP, IPv4/IPv6, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, HTTP, HTTPs, Samba, PPPoE, UPnP, Bonjour, RTP,
RTSP, RTCP
ANSTEUERUNG
Fernsteuerung Remote-Management unterstützt
Backup / Wiederherstellung Speichern / Abrufen von Konfi gurationsdateien
TV-VS1
rev: 08.31.2011
Einzelkanal Analog zu IP Video Encoder
TV-VS1 (V1.0R)