Datasheet

Single Channel Analog to IP Video Encoder
TV-VS1 (V1.0R)
SPECIFICATIONS
GENERAL
Video • Video In: CVBS / 1 Vp-p±0.2 / 75 Ohms ; BNC connecter
• Video Out: CVBS /1 Vp-p /75 Ohms; BNC connecter
Audio • Line In: 3.5mm microphone in jack
• Line Out: 3.5mm audio out jack
• S/N Ratio: < 60dB
• Codec: PCM/AMR
• 2 Way audio supported
GPIO • Ground, GPIO in/out, DV12V output, RS485 TX+/TX-
SD Slot • Supports SD/SDHC (up to 32GB)
Pan/Tilt/Zoom • Protocol: Pelco D
• 32 presets
• Auto Patrol
HARDWARE
Network • IEEE 802.3u 10/100Mbps Fast Ethernet, Auto-MDIX
LED • Power, Link
Reset Button • Push and release to reboot • Push and hold for 5 seconds to restore to factory default
Power Consumption • 7 Watts
Power • 12V, 1.5A external power adapter
Dimension • 160 x 109 x 36 mm (6.3 x 4.3 x 1.4 in.)
Weight • 430 g (15.2 oz.)
Temperature • Operating: 0° ~ 45° C (32° ~ 113° F) Storage: -15°C ~ 60°C (5°F ~ 140°F)
Humidity • Max. 85% (non-condensing)
Certifi cations • CE, FCC
REQUIREMENTS
Management Interface • Internet Explorer 6.0 or above
To run Utility • Windows 7(32/64-bit), Vista(32/64-bit), XP(32/64-bit)
Network Protocols • TCP/IP, IPv4/IPv6, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, HTTP, HTTPs, Samba, PPPoE, UPnP, Bonjour, RTP,
RTSP, RTCP
MANAGEMENT
Remote • Remote management supported
Backup / Restore • Save/retrieve confi guration fi les
SETTINGS
Image • Brightness, contrast, saturation, mirror (horizontal/vertical)
Video Encoder • Encoding type: H.264, MPEG4, MJPEG
• Resolution/Frame rate(auto-sensing)
704 x 480, 352 x 240, 176 x 120, up to 30 fps (NTSC)
704 x 576, 352 x 288, 176 x 144, up to 25 fps (PAL)
• Compression: 5 levels
Recording • Recording type: continuous, schedule, or motion detection
Port Settings • HTTP port: 80 (default), RTSP (554)
Digital Zoom • 3x
Dynamic DNS • Yes
Time • Synchronize with NTP server or set time/date manually
SMTP • Supported up to 2 destination email accounts
System Log • 100 entries (max)
Single Channel Analog to IP Video Encoder
TV-VS1
TV-VS1
rev: 08.16.2011