TRENDnet User’s Guide Contents Product Overview ............................................................................ 4 Features ...................................................................................................................4 Specifications ...........................................................................................................4 Package Contents ....................................................................................................5 Front View ....
TRENDnet User’s Guide TV‐IP315PI Events .............................................................................................40 Motion Detection ................................................................................................. 40 Video Tampering .................................................................................................. 42 Notification ........................................................................................................... 43 Snapshot .....
TRENDnet User’s Guide Product Overview TV‐IP315PI Specifications 4 Megapixel Record up to 4MP HD video (2560 x 1440) at 30 fps in the space saving H.265 compression format. Covert Night Vision Masked IR LEDs provide covert night‐time viewing up to 30 meters (98 ft.) away. Smart IR Smart IR dynamically adjusts the Infrared (IR) LEDs by lowering the IR intensity when objects are near, and increasing IR intensity when objects are farther away Features TRENDnet’s Indoor/Outdoor 4MP H.
TRENDnet User’s Guide TV‐IP315PI Storage ONVIF Record video to a network storage device or to a Micro SD card (up to 128GB not included). ONVIF Profile S and Profile G Advanced Playback Advanced in‐camera archived video playback functionality Complimentary Apps Live video to a mobile device with free iOS® and Android™ apps Package Contents Motion Detection TV‐IP315PI package includes: Create custom motion detection zones to record video and send email notifications when a zone is triggered.
TRENDnet User’s Guide Front View TV‐IP315PI Angle Adjustment Loosen the tilt lock screws, adjust the tilting position in a range, and tighten the tilt lock screws. Reset Button 1. Mounting base 2. Horizontal stand 3. Vertical stand 4. Lower dome 5. 10/100Mbps PoE network port 6. Power port (optional) 7. Infra‐red lamps 8. Lens 9. Black Liner 10. Safety rope Push and hold the reset button then power on the camera.
TRENDnet User’s Guide TV‐IP315PI Warnings Cautions Serious injury or death may be caused if any of these warnings are neglected. Follow these safety guards to prevent serious injury or death. Injury or equipment damage may be caused if any of these cautions are neglected. Follow these precautions to prevent potential injury or material damage.
TRENDnet User’s Guide Plan for installation location Viewing angle The TV‐IP315PI is a dome camera with a focused viewing angle (81) that provides non‐distorted and detailed images. Choose the location where has good angle to shoot the image you expect to see. The motion detection area should also be considered when installing the camera. TV‐IP315PI • Sunlight: Avoid direct sun light exposure. Direct sun light will damage the image sensor.
TRENDnet User’s Guide Hardware Installation Cabling It’s recommended that the wiring the cable in your home or office by a professional. If you already have the cable deployed, make sure the cable and the connectors meet the category 5 Ethernet cable standards. At least 2 pairs of twisted lines are required for power and data. Poor cable quality may cause unexpected problems. Testing your cable or running a new cable is suggested for new camera installation.
TRENDnet User’s Guide 4. This will also require you to Install WinPcap program if you don’t have this installed before, please follow the on screen Instructions to Install It. TV‐IP315PI 6. After the computer has restarted, double click on the Camera Utility icon to launch the program. 7. Find the camera you would like to access and configure then double click on the IP address. 5. Restart the computer after the Installation. 8.
TRENDnet User’s Guide Logging‐in to the Camera for the First Time (Windows) 1. Find the camera from the Utility and double click on the IP address to open the browser. 2. Activate the admin User Account by entering your desired password, and then click OK. © Copyright 2018 TRENDnet. All Rights Reserved. TV‐IP315PI 3. The camera management page will detect if you installed the camera video streaming plug‐in or not. . Click the link to download the plug‐in from the camera.
TRENDnet User’s Guide 5. Permission request may show up depends on the Internet security settings on your computer. Click Yes to install the plug‐ in. TV‐IP315PI 7. Click Finish to finish the installation. 8. Open the browser and login again, enter the user name admin and new password again to start secured session. 6. Click Next to install the plug‐in. © Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide 9. Refresh the browser and the Live View page will show up and begin streaming video TV‐IP315PI Logging‐in to the Camera for the First Time (OS X) 1. Open the web browser on your computer. In the address bar, enter the default IP address of the camera 192.168.10.30. If the camera is connected to a router/network, please use a windows machine to setup the camera with Camera Utility. 2. 3. Enter the user name, admin, and the default password, admin, and then click OK.
TRENDnet User’s Guide 4. The camera management page will detect if you installed the camera webcomponent plug‐in or not. Click the link to download the plug‐in from the camera. Note: Internet connection is required to download the plug‐in. If you do not have Internet access, you can find the plug‐in on the CD comes with the package under /Mac folder. 5. Quit your browser completely by command‐Click on the browser icon and then click Quit before installing the plug‐in. © Copyright 2018 TRENDnet.
TRENDnet User’s Guide 8. Click Continue to install the plug‐in. TV‐IP315PI 10. Use the default location and click Install. 11. Enter your password and click Install Software 9. Select a destination to install the plug‐in. Then click Continue. © Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide 12. Installation will process automatically. TV‐IP315PI 14. Open the browser and login again with the default IP 192.168.10.30 or the IP that was dynamically assigned by your router. Enter the user name, admin, and the default password, admin, and then click OK. 15. The Live View page shows up and the video starts to stream. 13. Click Close to exit the installation. © Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TV‐IP315PI Live View After you log‐in into the camera management page, you’ll see the Live View page. Snapshot Click this icon to take a video snapshot. Zoom Click once to enable zoom. When enabled, click and drag the area on the picture to zoom in. Right click to resume 100% zoom. Click the icon again to disable zoom. The zoom function works in full screen mode as well. Recording Click once to start recording. Click it again to stop recording.
TRENDnet User’s Guide TV‐IP315PI Playback Time Line You can playback the video recording on the network storage and download the video clip and snapshots to your local computer. There is a play back head in the center of the time line represented in a yellow vertical line. To look for a specific video recording, move the time line by clicking and dragging it. If the recording is short, zoom in by clicking button. Click to zoom out the time scale.
TRENDnet User’s Guide TV‐IP315PI Playback Slice images from video playback Use playback controls to play back the video recording. You can take snapshots from playback video or make new video clips from the video you are playing back. Click this button to play the video. Click this button to pause video playback. Click this button to stop playback. Click this button increase playback speed*. Click this button decrease playback speed*. Click to playback video frame by frame.
TRENDnet User’s Guide Download sections of video TV‐IP315PI Download snapshots To save complete video sections or snapshots, you can download the files directly. Click Click button to list snapshots to download button to download video sections. Check the time of the recording, select the videos you want to download, and then click Download. © Copyright 2018 TRENDnet. All Rights Reserved. Select the type of event that triggered the snapshots. Choose the Start Time and End Time.
TRENDnet User’s Guide Log The log of the TV‐IP315PI will be saved on the network storage. You can search the relevant records and save to your local computer. (See Network Storage on page 46 to setup the storage.) TV‐IP315PI Search for logs Click the type of log and then the Start Time and End Time. Click Search to start searching. Click First Page, Prev Page, Next Page, and Last Page to show the logs. Click Save Log to save the logs to your computer. © Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TV‐IP315PI System Information System Information page shows the camera’s basic information. Network Information IP Address: IP address of the TV‐IP315PI Subnet Mask: Network range of IP address Default Gateway: The default route going from the TV‐IP315PI subnet. Primary DNS: Primary DNS server address Secondary DNS: Secondary DNS server address Basic Information Device Name: Human readable device name for easy identification.
TRENDnet User’s Guide System Configuration Device Settings Setup your camera name and location for easy identification. This camera name will also be recognized by other network camera software as the name of this camera. OSD, On Screen Display, camera name is referring to this setting as well. TV‐IP315PI Authentication RTSP: TV‐IP315PI’s video stream can be accessed with RTSP, Real Time Streaming Protocol.
TRENDnet User’s Guide TV‐IP315PI User Accounts Time Settings You can setup up to 16 user accounts to access the camera’s video stream with a web browser or real time video stream (RTSP). Only one administrator account can be setup to configure the TV‐IP315PI and cannot be deleted. The accuracy of the system clock is important for scheduling and accurate logging. You can synchronize the system time with your computer, or automatically check the time accuracy with a network time server (NTP server).
TRENDnet User’s Guide TV‐IP315PI Daylight Savings Live View Settings Setup daylight savings. Setup the live view video quality, file size and file saving directories. Automatic Update Enable DST: Check this box if your time zone has daylight savings. Start Time: Enter the date that daylight savings starts End Time: Enter the date that daylight savings ends DST Bias Enter how much time the daylight saving adjusted by daylight savings. Click Save to save the changes © Copyright 2018 TRENDnet.
TRENDnet User’s Guide Record File Settings Record file size: This size of live view video recording. You can choose 256MB, 512MB, or 1GB a file. Smaller file size is good for many short recordings. Save record Click Browse and then choose a new destination if you files to: want to save the file somewhere else. Save Click Browse and then choose a new destination if you downloaded want to save the file somewhere else.
TRENDnet User’s Guide Inport Config. File Config File: To load previously saved settings, click Browse to find the configuration file and then click Import. Status: Shows the status in loading configuration file. TV‐IP315PI Network Settings TCP/IP Setup your basic IPv4 and IPv6 network settings on this page. Export Config. File Export: Click Export to download configuration file. The file will be downloaded to the Download folder by default.
TRENDnet User’s Guide Network Interface MAC Address: Click this button to reboot this camera. Duplex and Choose one of the Ethernet duplex and speed to Speed: match your network. Default: auto. MTU: Maximum transmission unit. The maximum field size in the Ethernet packet. Multicast: Sends a stream to the multicast group address and allows multiple clients to acquire the stream at the same time by requesting a copy from the multicast group address.
TRENDnet User’s Guide TV‐IP315PI DDNS PPPoE Dynamic Domain Name Service, DDNS, allows you to find your camera from the Internet with an easy to remember domain name. Setup PPPoE (ADSL) connection to connect your camera with your ISP, Internet Service Provider. DDNS Enable DDNS: Check this box to enable DDNS Service. DDNS Type: Select a DDNS service provider. Server Address: Enter the DDNS server address. Domain: Enter your registered domain/host name on selected DDNS service.
TRENDnet User’s Guide SNMP SNMP Settings allows you to assign the contact details, location, community name and trap settings of SNMP. This is a networking management protocol used to monitor network‐attached devices. SNMP allows messages (called protocol data units) to be sent to various parts of a network. Upon receiving these messages, SNMP compatible devices (called agents) return data stored in their Management Information Bases.
TRENDnet User’s Guide TV‐IP315PI 802.1X Setup 802.1X for remote authentication service. Authentication Algorithm: Authentication Password: Private‐key Algorithm: Private‐key Password: Choose the authentication method to verify the source of information: MD5 or SHA. Specify the authentication password between 8 to 32 letters. Choose the privacy key to encrypt SNMP messages: DES or AES. Specify the privacy key between 8 to 32 letters. SNMP Other Settings SNMP Port: SNMP service port number.
TRENDnet User’s Guide TV‐IP315PI IP Address Filter Quality of Service (QoS) Set up a list of clients allow only the clients on the list to access this camera or to reject clients on the list from access this camera. Setup traffic prioritization tags the video packets to go through network switches and routers with assigned priority. You can set the Differentiated Services Code Point (DSCP) bits on outgoing data streams. The QoS capable network device will forward different data in different priorities.
TRENDnet User’s Guide TV‐IP315PI UPnP Video Settings Universal Plug‐and‐Play is a device discovery protocol set. It allows your camera to easily be found, for example, on a Windows operation system. Video Format UPnP Enable UPnP: Check this box to enable UPnP connection. Friendly Name: The name that will be appeared when searched. Port Mapping Enable Port Check this box to enable UPnP connection. Mapping: Port Mapping Choose Manual or Auto port mapping.
TRENDnet User’s Guide Resolution: H.264/H.265 TV‐IP315PI MJPEG Bitrate Type: Choose between variable bit rate or constant bit rate for video compression. The default is variable rate. Video Quality: Choose the video quality. The default is medium quality. Frame Rate: Choose the capturing frame rate. The default value is 30 frames per second. Reduce the frame rate to reduce the capture file size. Max. Bitrate: Choose the maximum video sampling bit rate.
TRENDnet User’s Guide TV‐IP315PI Display Settings Adjust video image quality, lightness, and color settings here. Brightness: Use the slider or enter a number (0‐100) to adjust the image brightness. Default: 50 Contrast: Use the slider or enter a number (0‐100) to adjust the image contrast. Default: 50 Saturation: Use the slider or enter a number (0‐100) to adjust the color saturation. The greater number means the color will be more saturated.
TRENDnet User’s Guide TV‐IP315PI Light sensitivities Smart IR: Smart IR can adjust the strength of infrared lights at night depending on the distance of an object to maintain the maximum IR light distance and while maintaining a clear picture when object is close by. Default: On. Max. Exposure Adjust this value for exposure time for Time: each picture. You can choose a value between 1/3 second to 1/100,000 second. The default value is 1/30 second exposure time for each picture.
TRENDnet User’s Guide On Screen Display Settings Image adjustments Back Light Compensation and Wide‐Dynamic‐ Range: TV‐IP315PI Back light compensation: Setup a fixed light source position to compensate and adjust the image in the dark. Choose the area that you want to enhance (dark area, not light source). Display the camera name and the time the video is shooting on the screen Note: By default, the WDR is disabled. Please enable WDR to set up back light compensation.
TRENDnet User’s Guide TV‐IP315PI Text Overlay Privacy Mask Display extra information on the screen over the image. Create a masking area to keep your privacy. You can create up to four independent masking areas by clicking and dragging on the screen. Check Box: Check this box to enable text overlay. Text Field: Enter the text you want to display. You can enter your local language if you want. The text field allows maximum 44 English letters or 20 non‐English characters.
TRENDnet User’s Guide TV‐IP315PI Video Recording Edit: Click Edit to edit the recording schedule. The Edit Schedule window will pop up. Pre‐record: Recording time before trigger event. Post‐record: Recording time after trigger event. Overwrite: Select Yes to allow older recordings to be overwritten. Enable Record Check this box and then click Save to enable video Schedule: recording. Click Save to save the changes © Copyright 2018 TRENDnet. All Rights Reserved. 1.
TRENDnet User’s Guide TV‐IP315PI Events Motion Detection Set up how the motion detection event will be triggered and what actions will be triggered. Enable Motion Detection: Enable Motion Tracking: © Copyright 2018 TRENDnet. All Rights Reserved. Check this box to enable motion detection. Click Save to save the choice. Check this box to enable motion tracking. Motion tracking is a dynamic display that shows the current status of motion detection. The motion tracking is displayed with grids in green.
TRENDnet User’s Guide Draw Area: Click Draw Area button to start drawing. Click and drag on the area you want to set up the motion detection. You can draw up to 8 different areas. Click Stop Drawing to stop drawing motion detection areas. The red grids represent the motion detection area. Sensitivity: Move the slider to adjust detection sensitivity. TV‐IP315PI 3. Set the time period and the event you want to trigger the video recording continuous (always recording) or motion detection. 4.
TRENDnet User’s Guide TV‐IP315PI Video Tampering This is to detect if the camera has been tampered with and surveillance is compromised. You can set up tamper proof notifications to alert the system manager to check the camera. Enable Check this box to enable tamper detection. Click Save Tamper to save the settings. Detection: Draw Area: Click Draw Area button to start drawing. Click and drag on the area you want to set up the tamper detection. You can setup only one area for tamper detection.
TRENDnet User’s Guide Arming Schedule Edit: Click Edit to edit the recording schedule. The Edit Schedule window will pop up. 1. Select day of the week you want to edit. 2. Select All Day or Customized schedule of the day. 3. Set the time period and the event you want to trigger the video recording continuous (always recording) or motion detection. 4. Click Select All or the weekday you want to have the same schedule on different day. 5.
TRENDnet User’s Guide Snapshot You can set up your camera to continuously taking snapshots or taking snapshots only when events happening. TV‐IP315PI Event triggered Enable: Check this box to take snapshots when an event is occurred. Format: Save snapshots in JPEG format Resolution: Uses the same resolution set in Video Format for the snapshot resolution. Quality: Choose a compression quality for snapshot. Interval: State the time interval between this series of snapshots. The default interval is 1 second.
TRENDnet User’s Guide TV‐IP315PI Email Set up email accounts for notifications. SMTP Port: Enable SSL: Attach Image/Interval: Authentication: User name: Password: Confirm: address as your incoming email server, maybe not. Please ask your email service provider for detail. Service port number for outgoing email.* Check this box if your service provider requires a SSL secured connection.
TRENDnet User’s Guide TV‐IP315PI Network Storage Network Storage Network Storage must be setup before it can be managed. For storage management, please refer to the next section. The TV‐IP315PI supports two formats of network storage file systems: NFS and CIFS. NFS, Network File System, is natively supported by Linux computers and most NAS, Network Attached Storage. CIFS, Common Internet File System, is natively supported by Windows® systems and now is generally supported by Linux.
TRENDnet User’s Guide Storage Management Network Storage must be setup before it can be managed. To setup storage, please refer to the previous section. TV‐IP315PI Format: Select a network storage volume and then click Format to format your network storage. This action will format the network volume (shared folder) for video recording. Placeholder files (formatting files) will be created to make sure disk allocation is appropriate and the file searching is optimized.
TRENDnet User’s Guide FTP Server TV‐IP315PI Enable Snapshot to FTP: Server Address: Port: User Name/Anonymous : Password: Confirm: Check this box if you want to store snapshots on the FTP. Enter the FTP server IP address. Enter the service port number of the FTP server. Check Anonymous if the FTP server does not require authentication. Enter the User Name if the FTP server requires authentication. Enter the password of the FTP account.
TRENDnet User’s Guide Appendix Direct video access ‐ RTSP To access the video directly through RTSP, just visit the camera IP address on port 554 by default. For example: 192.168.10.30:554 use the admin or user password the login. TV‐IP315PI FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. This device complies with Part 15 of the FCC Rules.
TRENDnet User’s Guide TV‐IP315PI Europe – EU Declaration of Conformity Français [French] This device complies with the essential requirements of the Directive 2004/108/EC and 2006/95/EC.
TRENDnet User’s Guide TV‐IP315PI Limited Warranty TRENDNET NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION MAINTENANCE OR USE OF TRENDNET’S PRODUCTS. TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase.
