Datasheet

ManualsBrandsTrendnet ManualsAutomationPoE Switch, Managed, 1Gbps, 220W, RJ45 Ports 18, PoE Ports 16

18-Port Gigabit PoE+ Smart Surveillance Switch

TPE-3018LS (v1.0R)

• 16 x Gigabit PoE+ ports

• 2 x Shared Gigabit ports (RJ-45 or SFP)

• 220W PoE power budget

• Easy-to-use web-based management interface

• Supports IPv6, LACP, VLAN, QoS, and IGMP Snooping

• Extend PoE+ signal up to 656 ft./200m at 10Mbps

• Front panel 4-digit LED display provides PoE power statistics

• Surveillance mode GUI for simpliﬁed conﬁguration and

network monitoring

• Device discovery for ONVIF compliant IP cameras and NVRs

• Upload building ﬂoorplans to create an E-map of surveillance

devices

• Change IP camera IP address settings

• Upgrade IP camera ﬁrmware

• Change IP camera administrator user name and password

• Bandwidth control per port

• 802.1Q, MAC, Surveillance, and Voice VLAN support

• IEEE 802.1p QoS with queue scheduling support

• Smart Fan

• 36Gbps switching capacity

• Lifetime Warranty

TRENDnet's Gigabit PoE+ Smart Surveillance Switch series is designed to simplify the installation and management of surveillance

networks, especially for integrators and installers. These ONVIF switches are optimized for the surveillance industry; surveillance

mode provides a graphical dashboard interface with detailed information about the switch and each connected PoE device. Connect

ONVIF compliant IP cameras and NVRs for more advanced capabilities such as changing device IP settings, and to view individual

IP camera video within the switch GUI. The Smart Surveillance Switches are also PoE self-healing switches featuring PoE device

auto-recovery and power scheduling.

Installers and integrators can save on equipment costs and reduce installation time with TRENDnet's Gigabit PoE+ Smart

Surveillance Switches by delivering up to 30W per port of PoE power and data over existing Ethernet cables. Available PoE port

controls include enabling and disabling PoE, PD alive check, and power scheduling. PD alive check is an automated PoE self-

healing switch feature that attempts to recover an unresponsive PoE device connected to the switch. If a PoE device such as a PoE

camera becomes unresponsive to pings, the ONVIF compliant switch will auto-reboot the PoE port in attempt to recover the device.

TPE-3018LS

Summary of content (5 pages)

PAGE 1
TPE-3018LS 18-Port Gigabit PoE+ Smart Surveillance Switch TPE-3018LS (v1.0R) • 16 x Gigabit PoE+ ports • 2 x Shared Gigabit ports (RJ-45 or SFP) • 220W PoE power budget • Easy-to-use web-based management interface • Supports IPv6, LACP, VLAN, QoS, and IGMP Snooping • Extend PoE+ signal up to 656 ft.
PAGE 2
TPE-3018LS These PoE+ ONVIF switches feature a 4-digit LED display showing total PoE power, available power, and power-per-port. They also support long distance PoE+ networking up to 656 ft./200m away at speeds up to 10mbps. TRENDnet's Gigabit PoE+ Smart Surveillance Switches also feature SFP slots to support long-distance ﬁber networking applications.
PAGE 3
TPE-3018LS FEATURES Hardware Design PoE Power Surveillance Mode Provides gigabit PoE+ ports, SFP slots for ﬁber connectivity, and a 1U 19” rackmount design with brackets included Each PoE+ managed ONVIF switch supplies up to 30W of power per port and data over a single Ethernet cable to PoE devices ONVIF switches are optimized for the surveillance industry, proving a graphical dashboard interface with useful information about the switch and each connected device Long Range PoE+ 4-Digit PoE LED Displ
PAGE 4
TPE-3018LS SPECIFICATIONS Standards • IEEE 802.1d • IEEE 802.1p • IEEE 802.1Q • IEEE 802.1s • IEEE 802.1w • IEEE 802.1X • IEEE 802.1ab • IEEE 802.3 • IEEE 802.3u • IEEE 802.3x • IEEE 802.3z • IEEE 802.3ab • IEEE 802.3ad • IEEE 802.3af • IEEE 802.3at • IEEE 802.
PAGE 5
TPE-3018LS MTBF • 331,516 hours Operating Temperature • 0 – 40°C (32 – 104°F) Operating Humidity • Max. 90% non-condensing Dimensions • 440 x 195 x 44.45mm (17.3 x 9.8 x 1.74 in.) • Rack mountable 1U height Weight • 2.93kg (6.45 lbs.) Certiﬁcations • CE • FCC • ETL Package Contents • TPE-3018LS • Quick Installation Guide • Power cord (1.5m/5 ft.