Spec Sheet

Gigabit Ultra PoE+ Injector

TPE-117GI (v1.0R)

TRENDnet’s Gigabit Ultra PoE+ Injector, model TPE-117GI, combines electrical power with a Gigabit network connection to produce a Gigabit Ultra

Power over Ethernet Plus signal. Auto-sensing technology conveniently delivers the correct wattage needed to power your Ultra PoE devices and PoE+

devices. Use an existing open port from a non-PoE switch to save installation and equipment costs when installing TRENDnet PoE access points and IP

cameras in remote locations.

• Full Duplex Gigabit speeds

• Supplies PoE (15 watts), PoE+ (30 watts) or Ultra PoE power (60 watts)

• Network a PoE device located up to 100 meters (328 ft.) away

• Converts a non-PoE Gigabit port to an Ultra PoE Gigabit port

• Save on installation and equipment costs

• Supports IEEE 802.3af / 802.at / Ultra PoE

TPE-117GI

PAGE 1
TPE-117GI Gigabit Ultra PoE+ Injector TPE-117GI (v1.0R) • Full Duplex Gigabit speeds • Supplies PoE (15 watts), PoE+ (30 watts) or Ultra PoE power (60 watts) • Network a PoE device located up to 100 meters (328 ft.) away • Converts a non-PoE Gigabit port to an Ultra PoE Gigabit port • Save on installation and equipment costs • Supports IEEE 802.3af / 802.
PAGE 2
TPE-117GI PoE Supplies a PoE device with PoE (15.
PAGE 3
TPE-117GI PoE Supplies a PoE device with PoE (15.4 watts), PoE+ (30 watts), or Ultra PoE (60 watts) power PoE Distance Provides an Ultra PoE network connection up to 100 meters (328 ft.
PAGE 4
TPE-117GI Specifications Standards • IEEE 802.3 • IEEE 802.3u • IEEE 802.3ab • IEEE 802.3af • IEEE 802.3at • IEEE 802.3bt compatible Temperature • 0 - 60 °C (32 - 140 °F) Humidity • Max. 95% non-condensing Certifications • CE • FCC Device Interface • 1 x Gigabit Data in port • 1 x Gigabit Ultra PoE out port • Metal Housing Dimensions • 120 x 75 x 22 mm (4 x 3 x 0.8 in.) Weight • 185 g (6.5 oz.) Power • Input: 100-240 V, 2 A 50-60 Hz • Output: 52 V, 1.