Quick Installation Guide TK-423K
Table ofofContents Table Contents English ..................................................................................................... 1. Before You Start ................................................................................ 2. How to Install ..................................................................................... 3. Operation ........................................................................................... 1 1 2 4 Specifications .................................
1. Before You Start Package Contents ? TK-423 ? Quick Installation Guide ? AC Power Adapter (5V DC, 2A) ? 4 sets of KVM Cables System Requirements ? PS/2 or USB Keyboard ? PS/2 or USB Mouse ? VGA Compatible Monitor ? KVM cables ? Windows 98SE/ME/2000/2003 Server/Vista, Linux, and Netware.
2. How to Install 1. Turn OFF all computers and their peripherals, and then disconnect all power cords. 2. Connect the shared PS/2 or USB keyboard, monitor, PS/2 or USB mouse, speakers (optional) and microphone (optional) to the KVM switch's Console Port. Connecting to USB Computer 3. Use the KVM cables to connect your PC to the KVM Switch. Then proceed to step 6. Note: Do not connect the PS/2 keyboard cable to your computer.
Connecting to PS/2 Computer 4. Connect the USB to PS/2 mouse adapter to the USB connector. 5. Use the KVM cables to connect your PC to the KVM Switch. To Mouse Port To VGA port To Keyboard Port To Computer via PS/2 6. Connect the included audio cables to the KVM switch and to your PC. 7. Connect the included AC Power Adapter to the KVM switch and then to a power outlet. Your installation is now complete.
3. Operation Note: To switch between computers, you can use the front-panel push buttons or the Hot Key commands. LED Indicators Red LED light: KVM cable is connected and PC is powering the KVM switch. Green LED light: Indicates the selected PC port is active, whether the computer is turned on or off. Push Buttons Press the push buttons to switch between computers.
Quick Reference Sheet for TK-423 Select PC Next lower channel Next higher channel Front-Panel Buttons Hot-Keys Command ScrLk + ScrLk + ScrLk + ScrLk + ScrLk Select the active PC channel (Arrow up) Press the Push Button for a specific port to switch to that port Select the next lower PC connected channel (Arrow down) Press the Push Button for a specific port to switch to that port Select the next higher PC connected channel X + ScrLk + Previous channel ScrLk + ScrLk + Select Audio/MIC
Specifications Management: 4 computers Console Port Connectors: 1 x USB keyboard Type A 1 x USB mouse Type A 1 x PS/2 keyboard 6-pin mini din female 1 x PS/2 mouse 6-pin mini din female 1 x VGA HDB 15-pin female 1 x 3.5mm audio in/out jack 1 x 3.5mm microphone in/out jack PC Port Connectors: 4 x VGA HDB 15-pin female 4 x 3.5mm audio in/out jack 4 x 3.
Troubleshooting Q1: Do I need to use the included external AC adapter? A1: You must use the included external AC adapter with the TK-423 KVM switch. Q2: I have the KVM switch connected properly, but my keyboard and mouse don’t work. What should I do? A2: First, make sure the power adapter is plugged into your KVM switch. Second, make sure your PS/2/USB ports are working properly by connecting your mouse and keyboard directly to the PS/2 or USB port computer.
Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase.
WARRANTIES EXCLUSIVE: IF THE TRENDnet PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMER'S SOLE REMEDY SHALL BE, AT TRENDnet'S OPTION, REPAIR OR REPLACEMENT. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation. Waste electrical and electronic products must not be disposed of with household waste. Please recycle where facilities exist. Check with you Local Authority or Retailer for recycling advice.
TRENDnet Technical Support US . Canada Toll Free Telephone: 1(866) 845-3673 24/7 Tech Support Europe (Germany . France . Italy . Spain . Switzerland . UK) Toll Free Telephone: +00800 60 76 76 67 English/Espanol - 24/7 Francais/Deutsch - 11am-8pm, Monday - Friday MET Worldwide Telephone: +(31) (0) 20 504 05 35 English/Espanol - 24/7 Francais/Deutsch - 11am-8pm, Monday - Friday MET Product Warranty Registration Please take a moment to register your product online. Go to TRENDnet’s website at http://www.
