Quick Installation Guide TK-217i 1.
Table of Contents English 1. Before You Start 2. How to Install 3. Operation 4. Using the KVM Utility 1 1 2 3 4 Technical Specifications Troubleshooting 10 11 Version 02.15.
1.
2. How to Install 1. Properly turn OFF your computers and monitors. 2. Connect the shared keyboard, monitor and mouse to the KVM Switch's console ports. 3. Use the integrated KVM cables to connect both of your computers to the KVM Switch. To Computer To Computer Computer 1 4. Turn ON the first computer and wait until startup completes. 5. Press the push button toggle switch to select the second computer (Optional). 6. Turn ON the second computer and wait until startup completes.
3. Operation Note: 1. The TK-217i KVM Switch does not require any drivers or software (optional). 2. For Computer switching, you can use the KVM Switch's push button switch, a Hot-Key command sequence via keyboard, or the KVM Utility (Windows / MAC OS X (10.4~10.6) only). For more information on the KVM utility, please see section 4, Using the KVM Utility. Installing and using the KVM utility is optional. Push button switch Press the push button switch to swich to the other computer.
4. Using the KVM Utility For Windows Users 1. Insert the Utility CD-ROM into your CD-ROM Drive. 2. Click Run AUTORUN.EXE (Windows 7/Vista Only) 3. Click Install Utility. 4. Click Next. Then follow the Setup Wizard instructions. 5. Click Finish.
6. Double click on the USB KVM Switcher icon. 7. If you would like to modify the hot key, type in a character. You can enter any number, letter or symbol. Control keys such as Alt, Ctrl, Shift, CAPS LOCK, Tab, Esc, and Num Lock and function keys cannot be used. Example: CTRL + ALT + A. 8. Select a desired Auto Scan period (10~60). Options are in increments of 5 seconds. 9. Once you made all desired changes, then click OK. 10. Right click on the KVM utility icon in the system tray.
For Mac OS X (10.4~10.6) Users 1. Insert the Utility CD-ROM into your CD-ROM Drive. 2. Double-click on the TK-217i CD-ROM icon on your desktop. 3. Double-click on the Macintosh folder. 4. Double-click on TrendnetUSBKVMSwitcher.pkg. 5. Click Continue. 6. Select a destination and then click Continue.
7. Click Install. 8. When the Authenticate screen appears, enter the Name and Password for your computer and then click OK. 9. Click Close. 10. Double click on the Macintosh HD icon. 11. Double click on the Applications icon. 12. Click on Trendnet USB-KVM Switcher.
13. Double click on the USB-KVM Switcher icon in the Dock. If your computer is connect to computer 1 port, you should see an icon with the number 1. If your computer is connected to computer 2, you should see an icon with the number 2. 14. If you would like to modify the hot key, type in a character. You can enter any number, letter or symbol. Control keys such as Alt, Ctrl, Shift, CAPS LOCK, Tab, Esc, and Num Lock and function keys can not be used. Example: CTRL + ALT + A. 15.
18. Select the computer that you want to switch to. 19. Click Start Auto-Scan to start Auto-Scan. Right click the KVM Utility icon and select Stop Auto-Scan to stop Auto-Scan. Your installation is now complete For detailed information regarding the TK-217i, configuration and advanced settings, please refer to the Troubleshooting section, User's Guide on the Utility CD-ROM, or TRENDnet's website at http://www.trendnet.com.
Technical Specifictions Hardware Controls 2 Computers Cable 2 sets of VGA and USB combination cables ( length: 77 cm, 31 in.) Computer Connectors 2 x USB Type A ports (male) 2 x 15-pin VGA ports (female) Console Connectors 1 x 15-pin VGA (male) 2 x USB Type A ports (female) (mouse and keyboard connections) Video Resolution Up to 2048 x 1536 Port Selection Push Button switch (with 1.45 m, (57 in.
Troubleshooting 1. Where is the power supply? I did not find one in the box. The TK-217i does not require a power supply. It draws power from your computer's USB connections. As long as your KVM switch is connected to the USB port, it will receive the necessary power to function. 2. I have the TK-217i connected properly, but my keyboard and mouse don't work. 1. Make sure your USB ports are working properly by connecting your mouse and keyboard directly to the USB ports on your computers. 2.
12
Copyright ©2011. All Rights Reserved. TRENDnet.
