User’s Guide TK-208K
Table ofofContents Table Contents English ...................................................................................................... 1. Before You Start ................................................................................. 2. How to Connect ................................................................................. 3. Using the KVM Switch ....................................................................... 1 1 2 4 Specifications ............................................
1.
2. How to Connect 1. Connect the Monitor to your Switch's Console Port. 2. Connect the Keyboard, Mouse, Microphone and Speakers to the Switch's Console Port. 3. Use the provided KVM cables to connect your PC to your KVM switch.
4. Connect the other end of the cable to the Switch's PC Port. 5. Connect the other end of the Audio cable to the Switch's Audio Port. 6. Turn on all connected PC’s. Your installation is now complete.
3. Using the KVM Switch To alternate between computers, you use hot-key commands. Hot-Key Commands A keyboard hot-key command consists of three keystrokes: Hot-Key command = ScrLk + ScrLk + Command key(s) After pressing the ScrLk key, you have 2 seconds to press the ScrLk key again. You then have another 2 seconds to press a command key. If you do not press a key within 2 seconds, the switch will exit hot-key mode. NOTE 1. Hotkey command works on top row numbers keys only. 2.
Quick Reference Sheet for TK-208K Select PC Description Hot-Keys Command ScrLk + ScrLk + X Select the active PC channel. FX Select the active Audio/Mic channel x = 1 ~ 2 for PC channel number Select Audio/Mic Channel ScrLk + ScrLk + (Fx is a function key) x = 1 ~ 2 for Audio mic channel number Bind PC & Audio/Mic Switching ScrLk + ScrLk + Q Enable the binding of PC port and Audio/Mic port switching.
Specifications Computer Connections: 2 KVM Cable: 2 Sets of 1.2M (4ft) KVM & Audio Cables KVM To Console: 1 x 15-pin HDB type VGA (Male) Cable Connectors: To PC: • 1 x PS/2 Keyboard 6-pin Mini Din (Male) • 1 x PS/2 Mouse 6-pin Mini Din (Male) • 1 X VGA HDB 15-pin (Male) Audio To Console: 2 x USB (Type Mini B) To PC: • 1 x 3.5mm audio in/out jack • 1 x 3.
Troubleshooting Q1: Where is the power supply? I did not find one in the box. A1: The TK-208K does not require a power supply. It draws power from your computer's PS/2 connections. As long as your KVM switch is connected to the PS/2 port, it will receive the necessary power to function. Q2: I have the KVM switch connected properly, but my keyboard and mouse don't work. A2: Please make sure your PS/2 port is working properly by testing it with your other PS/2 devices.
Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase.
WARRANTIES EXCLUSIVE: IF THE TRENDnet PRODUCT DOES NOT OPERATE AS WARRANTED ABOVE, THE CUSTOMER'S SOLE REMEDY SHALL BE, AT TRENDnet'S OPTION, REPAIR OR REPLACEMENT. THE FOREGOING WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW, STATUTORY OR OTHERWISE, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
TRENDnet Technical Support US/Canada Support Center European Support Center Contact Contact Telephone: 1(866) 845-3673 Email: support@trendnet.