Datasheet

ManualsBrandsTrendnet ManualsAutomationPoE Splitter, 2Gbps, 60W, RJ45 Ports 2, PoE Ports 1

Industrial Gigabit UPoE Splitter

TI-SG104 (v1.0R)

• Power a non-PoE device up to 100m (328 ft.) away from PSE

• Splits a gigabit PoE signal into separate power and data sources

• A single Ultra PoE source can power up to two devices

• Adjustable voltage output supports 12V, 16V, 24V or 48V devices

• For best performance pair with UPoE switches or injectors

• Save on installation and equipment cost

• Full Duplex Gigabit speeds

• IEEE 802.3bt compatible

TI-SG104

TRENDnet’s Industrial Gigabit UPoE Splitter, model TI-SG104, networks a non-PoE device by using a Gigabit Ultra PoE connection and splitting it into

separate power and gigabit data sources. The industrial gigabit UPoE splitter can power to up to two devices from a single UPoE source. A convenient DIP

switch adjusts output power to 12V, 16V, 24V, or 48V in order to match power requirements for non-PoE devices. The UPoE splitter’s dual DC power output

provides greater device compatibility.

Summary of content (3 pages)

PAGE 1
TI-SG104 Industrial Gigabit UPoE Splitter TI-SG104 (v1.0R) • Power a non-PoE device up to 100m (328 ft.) away from PSE • Splits a gigabit PoE signal into separate power and data sources • A single Ultra PoE source can power up to two devices • Adjustable voltage output supports 12V, 16V, 24V or 48V devices • For best performance pair with UPoE switches or injectors • Save on installation and equipment cost • Full Duplex Gigabit speeds • IEEE 802.
PAGE 2
TI-SG104 UPoE Powered Adjustable Voltage Output Wall Mountable No power adapter necessary; the UPoE splitter takes a UPoE network connection, and splits power and data into separate connections to network a non-PoE device with power up to 100m (328ft.). Convenient DIP switch adjusts voltage output to 12V (2.3A), 16V (2.3A), 24V (2.3A) or 48V (1.25A) to match non-PoE device power requirements. The UPoE splitter’s wall mountable design accommodates most installation scenarios.
PAGE 3
TI-SG104 Speciﬁcations Standards Device Interface • IEEE 802.3 • IEEE 802.3u • IEEE 802.3ab • IEEE 802.3af • IEEE 802.3at • IEEE 802.