Datasheet

FEATURES
SPECIFICATIONS
Standards
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3ab
• IEEE 802.3x
• IEEE 802.3af
• IEEE 802.3at
Device Interface
• 8 x Gigabit PoE+ ports
• 6-pin removable terminal block
• LED indicators
• DIN-Rail mount
• Wall mount
• Grounding point
Data Transfer Rate
• Ethernet: 10Mbps (half duplex), 20Mbps (full
duplex)
• Fast Ethernet: 100Mbps (half duplex),
200Mbps (full duplex)
• Gigabit: 2000Mbps (full duplex)
Performance
• Data RAM Buffer: 1MB
• Switching Fabric: 16Gbps
• MAC Address Table: 4K entries
• Jumbo Frame: 9KB
• Forwarding rate: 11.9Mpps (64-byte packet
size)
Special Features
• Hardened components rated for extreme
temperatures
• Dual power inputs
• ESD 8KV support
DC Power
• Input: 24 – 56V DC
• Compatible power supply: TI-S24048 (sold
separately)
• Max. consumption: 5.3W (no PoE)
PoE
• Max. power budget: 200W @56V DC
• Max. power budget: 120W @24V DC
Terminal Block
• Redundant power inputs, alarm relay contact, 6
pin
• Wire range: 0.34mm^2 to 2.5mm^2
• Solid wire (AWG): 12-24/14-22
• Stranded wire (AWG): 12-24/14-22
• Torque: 5 lb. – In / 0.5Nm / 0.56 Nm
• Wire strip length: 7-8mm
Alarm Relay Contact
• Relay outputs with current carrying capacity of
1A, 24V DC
• Open circuit mode when two power sources
are connected
• Short circuit mode when only one power
source is connected
MTBF
• 529,765 hours
Housing
• IP30 metal case
• DIN-Rail mount
• Wall mount
• Grounding point
Operating Temperature
• -40° – 75° C (-40° – 167° F)
Operating Humidity
• Max. 95 % non-condensing
Dimensions
• 142 x 105 x 36mm (5.6 x 4.1 x 1.4 in.)
Weight
• 622g (1.4 lb.)
Certifications
• CE
• FCC
• Shock (IEC 60068-2-27)
• Freefall (IEC 60068-2-32)
• Vibration (IEC 60068-2-6)
• IEC 61000-4-2
• IEC 61000-4-4
• IEC 61000-4-5
Warranty
• Lifetime
Package Contents
• TI-PG80B
• Quick Installation Guide
PoE+ Power Budget
Supplies up to 30W of PoE power per
port on the industrial variable voltage
switch with a 200W PoE power budget
Network Ports
8 x Gigabit PoE+ ports
DIN-Rail/Wall Mounts
IP30 rated metal enclosure with DIN-
Rail and wall mount hardware included
Switching Capacity
16Gbps switching capacity
Redundant Power
Dual 24V – 56V DC power inputs with
overload current protection
(compatible power supplies for this
industrial variable voltage PoE+ switch
sold separately, models: TI-S24048,
TI-S12024)
Jumbo Frame
Sends larger packets, or Jumbo
Frames (up to 9KB), for increased
performance on the variable voltage
switch
Wide Operating Temperature
Industrial variable voltage switch rated
for an operating temperature range of
-40° – 75° C (-40° – 167° F)
Shock and Vibration Resistant
Rated for shock (EN 60068-2-27),
freefall (EN 60068-2-32), and vibration
(EN 60068-2-6)
Grounding Point
Grounding point on the industrial
variable voltage switch protects
equipment from external electrical
surges
TI-PG80B
20675 Manhattan Place • Torrance • CA 90501 • USA • T: 1-888-326-6061 • F: 1-310-961-5511 • [e-mail] • www.TRENDnet.com
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at
any time, without notice. For the most recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved.
Updated: 3/23/2020
• Removable terminal block
• DIN-Rail and wall mount kit