Datasheet

Specifications
Standards
IEEE 802.3
IEEE 802.3u
IEEE 802.3ab
IEEE 802.3z
IEEE 802.3x
IEEE 802.3af
IEEE 802.3at
Device Interface
4 x Gigabit PoE+ ports
1 x Shared Gigabit port
1 x Shared SFP slot
1 x Dedicated SFP slot
6-pin removable terminal block
LED indicators
DIP switch
DIN-Rail mount
Wall mount
Grounding point
Data Transfer Rate
Ethernet: 10 Mbps (half duplex), 20 Mbps (full
duplex)
Fast Ethernet: 100 Mbps (half duplex), 200 Mbps
(full duplex)
Gigabit: 2000 Mbps (full duplex)
Performance
Data RAM Buffer: 1024 KB
Switching Fabric: 12 Gbps
MAC Address Table: 1 K entries
Jumbo Frame: 9 KB
Forwarding rate: 8.9 Mpps (64-byte packet size)
Special Features
Hardened components rated for extreme
temperatures
Dual redundant power inputs
Auto-Negotiation
Auto store and forward architecture
Automatic address learning and address aging
ESD 8KV support
DC Power
Input: 48 - 56 V DC
Compatible power supply: TI-S12048 (sold
separately)
Consumption: Max. 5.76 Watts (no PoE)
AC Power
Input: 100 - 240 V AC, 50/60 Hz, 2 A
Compatible power adapter: 48VDC3000 (sold
separately)
Output: 48V DC, 3.34 A 160 W max.
PoE
PoE budget: 120 Watts
Terminal Block
Redundant power inputs, alarm relay contact, 6 pin
Wire range: 0.34 mm^2 to 2.5 mm^2
Solid wire (AWG): 12-24/14-22
Stranded wire (AWG): 12-24/14-22
Torque: 5 lb. – In / 0.5 Nm / 0.56 Nm
Wire strip length: 7-8 mm
DIP Switch
1: OFF (port 5 SFP on, default), ON (port 5 SFP
off)
2: OFF (SFP 1000M, default), ON (SFP 100M)
Alarm Relay Contact
Relay outputs with current carrying capacity of 1A,
24V DC
Open circuit mode when two power sources are
connected
Updated: 10/31/2016
TI-PG62
20675 Manhattan Place Torrance CA 90501 USA T: 1-888-326-6061 F: 1-310-961-5511 sales@trendnet.com www.TRENDnet.com
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at any time, without notice. For the most
recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved.
Short circuit mode when only one power source is
connected
MTBF
460,304 hours
Housing
IP30 metal case
DIN-rail mount
Wall mount
Grounding point
8 KV ESD protection
Operating Temperature
- 40 to 75 °C (-40 to 167 °F)
Operating Humidity
Max. 95 % non-condensing
Dimensions
143 x 105 x 36 mm (5.6 x 4.1 x 1.4 in.)
Weight
500 g (1.1 lb)
Certifications
CE
FCC
Shock (IEC 60068-2-27)
Freefall (IEC 60068-2-32)
Vibration (IEC 60068-2-6)
Warranty
Limited Lifetime Warranty*
Package Contents
TI-PG62
Quick Installation Guide
Removable terminal block
DIN-rail and wall mount kit