Datasheet

Specifications
Standards
IEEE 802.1p
IEEE 802.1Q
IEEE 802.1ab
IEEE 802.3
IEEE 802.3u
IEEE 802.3x
IEEE 802.3z
IEEE 802.3ab
IEEE 802.3af
IEEE 802.3at
IEEE 802.3az
Device Interface
4 x Gigabit PoE+ ports
1 x Gigabit port
1 x Gigabit SFP slot
6-pin removable terminal block (primary/RPS
power inputs & alarm relay output)
Optional power adapter input (adapter sold
separately)
DIP switch (Alarm for Primary/RPS power)
LED indicators
Data Transfer Rate
Ethernet: 10 Mbps (half-duplex), 20 Mbps (full-
duplex)
Fast Ethernet: 100 Mbps (half-duplex), 200 Mbps
(full-duplex)
Gigabit Ethernet: 2000 Mbps (full-duplex)
SX/LX: 2000 Mbps (full-duplex)
Performance
Switch fabric: 12 Gbps
RAM buffer: 128 MB
MAC address table: 8K entries
Jumbo frames: 10 KB
Forwarding rate: 8.93 Mpps (64-byte packet size)
Management
CLI (Telnet)
HTTP web based GUI
SNMP v1, v2c
SNMP trap
RMON groups 1, 2, 3, 9
Enable/disable 802.3az power saving
LLDP
SNTP
SMTP alert
Syslog
Port statistics/utilization
Traffic monitor
Trusted host
Port mirror (Ingress, Egress, Both)
Storm control (Multicast, DLF, Broadcast)
MIB
MIB II RFC 1213
Bridge MIB RFC 1493
Ethernet Interface MIB RFC 1643
RMON MIB RFC 1757
Power Ethernet MIB RFC 3621
Quality of Service (QoS)
802.1p Class of Service (CoS)
DSCP (Differentiated Services Code Point)
Bandwidth control per port
Queue Scheduling: Strict Priority (SP), Weighted
Fair Queuing (WFQ), Weighted Round Robin
(WRR)
VLAN
802.1Q tagged VLAN
MAC-based VLAN
Port isolation
Up to 256 VLAN groups, ID range 1-4094
Multicast
IGMP snooping v1, v2, v3
Static multicast address
Up to 256 multicast entries
Special Features
CLI & web based management
Full power PoE+
Wide operating temperature range
Dual redundant power inputs
Alarm relay triggered by power failure
Surge/ESD protection
Power
PWR (Primary) terminal input: 48 – 57V DC (TI-
S12048 sold separately)
RPS (Redundant) terminal input: 48 – 57V DC (TI-
S12048 sold separately)
Consumption: 10 Watts (max.), 130 Watts (max.)
with PoE+ fully loaded
Optional Power Adapter (48VDC3000 sold
separately)
Input: 100 – 240 V AC, 50/60 Hz, 2 A
Output: 48 V DC, 3.34 A 160 Watts max.
Optional Power Supply (TI-S24048 sold
separately)
Input: 100 – 240 V AC, 50/60 Hz, 1.8 A 125 – 370
V DC
Output: 240 Watts, 48 V, 5 A
DIN-rail: TS-35/7.5 or 15
Operating Temperature: - 25 to 70 °C (- 13 to 158
°F)
PoE
PoE budget: 120 Watts
Up to 15 Watts per port for PoE
Up to 30 Watts per port for PoE+
Mode A: Pins 1, 2 (V+) and pins 3, 6 (V-)
PoE enable/disable per port setting, priority,
scheduling, power delay, and PD alive check
Enclosure
IP30 rated metal enclosure
DIN-Rail Mount
Grounding Point
ESD (Ethernet) Protection: 8KV DC
Surge (Power) Protection: 6KV DC
MTBF
180,136 hrs @ 65 °C
435,905 hrs @ 25 °C
Operating Temperature
- 40 – 70 °C (- 40 - 158 °F)
Operating Humidity
Max. 95% non-condensing
Dimensions
135 x 120 x 31 mm (5.31 x 4.72 x 1.22 in.)
Weight
528 g (1.17 lbs.)
Certifications
CE
FCC
Shock (IEC 60068-2-27)
Freefall (IEC 60068-2-32)
Vibration (IEC 60068-2-6)
Warranty
Limited Lifetime Warranty
Package Contents
TI-PG541i
Quick Installation Guide
CD-ROM (User’s Guide)
TRENDnet offers a limited lifetime warranty for all of its metal-enclosed network switches that have been purchased in the United States/Canada on or after 1/1/2015. Cooling fan and internal power supply carry a one-year
warranty.
Updated: 6/1/2016
TI-PG541i
20675 Manhattan Place Torrance CA 90501 USA T: 1-888-326-6061 F: 1-310-961-5511 sales@trendnet.com www.TRENDnet.com
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject to change at any time, without notice. For the most
recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved.