Datasheet

FEATURES
SPECIFICATIONS
Standards
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3ab
• IEEE 802.3x
• IEEE 802.3z
• IEEE 802.3af
• IEEE 802.3at
Device Interface
• 14 x Gigabit PoE+ ports
• 2 x Gigabit SFP slots
• 6-pin removable terminal block
• LED indicators
• DIN-Rail mount
• Wall mount
• Grounding point
Data Transfer Rate
• Ethernet: 10Mbps (half duplex), 20Mbps (full
duplex)
• Fast Ethernet: 100Mbps (half duplex),
200Mbps (full duplex)
• Gigabit: 2000Mbps (full duplex)
• SFP: 2000Mbps (full duplex)
Performance
• Data RAM Buffer: 512KB
• Switching Fabric: 32Gbps
• MAC Address Table: 8K entries
• Jumbo Frame: 9KB
• Forwarding rate: 23.8Mpps (64-byte packet
size)
Special Features
• Hardened components rated for extreme
temperatures
• Multiple redundant power inputs
• ESD contact 6kV, air 8kV, and surge 2kV
support
• Low-profile design
DC Power
• Input: 48 – 56V DC
• Recommended power supply: TI-S48048 (sold
separately)
• Max. consumption: 13W (no PoE)
Optional Power Adapter (48VDC3000 sold
separately)
• Input: 100 – 240V AC, 50/60Hz, 2A
• Output: 48V DC, 3.34A 160W max.
PoE
• PoE budget: 240W
Terminal Block
• Multiple power inputs, alarm relay contact, 6
pin
• Wire range: 0.34mm^2 to 2.5mm^2
• Solid wire (AWG): 12-24/14-22
• Stranded wire (AWG): 12-24/14-22
• Torque: 5 lb. – In / 0.5Nm / 0.56Nm
• Wire strip length: 7-8mm
Alarm Relay Contact
• Relay outputs with current carrying capacity of
1A, 24V DC
• Open circuit mode when two power sources
are connected
• Short circuit mode when only one power
source is connected
MTBF
• 504,738hrs @ 50° C
• 222,000hrs @ 75° C
PoE+ Power
Industrial PoE+ switches supply
Power over Ethernet devices with up
to 30W of PoE+ power per port
Gigabit Ports
Copper Gigabit PoE+ ports for high-
speed device connections with the
industrial unmanaged PoE+ switch,
and SFP slots that support 1000Base-
FX modules for long distance fiber
networking applications
DIN-Rail / Wall Mounts
Rugged industrial PoE+ switch with
IP30 rated metal enclosure, including
DIN-Rail mount and wall mount
hardware
Redundant Power
Multiple power inputs on the industrial
PoE+ switches provide redundant
power with overload current protection
(power supply sold separately, model:
TI-S48048)
Alarm Relay
Alarm relay triggered by power failure
of primary and/or redundant power
Jumbo Frame
Supports larger packets, or Jumbo
Frames (up to 9KB), for increased
performance
Wide Temperature Range
A wide operating temperature range of
-40° – 75° C (-40° – 167° F) allows for
installations in industrial environments
with extreme hot or cold conditions
Shock and Vibration Resistant
These hardened industrial PoE+
switches are rated for shock (EN
60068-2-27), freefall (EN 60068-2-32),
and vibration (EN 60068-2-6)
Electro Magnetic Compliance
Complies with industrial EMS
certifications (IEC 61000-4-2) ESD:
Contact: 6kV | Air: 8kV, (IEC
61000-4-4) EFT: Power: 2kV | Signal:
2kV, (61000-4-5) Surge: Power: 2kV |
Signal: 2kV
Grounding Point
This industrial PoE+ switch features a
grounding point for protection against
external electrical surges
TI-PG162