Datasheet

FEATURES
SPECIFICATIONS
Standards
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3ab
• IEEE 802.3x
• IEEE 802.3af
• IEEE 802.3at
Device Interface
• 16 x Gigabit PoE+ ports
• 6-pin removable terminal block
• LED indicators
• DIN-Rail mount
• Wall mount
• Grounding point
Data Transfer Rate
• Ethernet: 10Mbps (half duplex), 20Mbps (full
duplex)
• Fast Ethernet: 100Mbps (half duplex),
200Mbps (full duplex)
• Gigabit: 2000Mbps (full duplex)
Performance
• Data RAM Buffer: 512KB
• Switching Fabric: 32Gbps
• MAC Address Table: 8K entries
• Jumbo Frame: 9KB
• Forwarding rate: 23.8Mpps (64-byte packet
size)
Special Features
• Hardened components rated for extreme
temperatures
• Dual redundant power inputs
• ESD contact 6kV, air 8kV, and surge 2kV
support
• Low-profile design
DC Power
• Input: 48 – 56V DC
• Recommended power supply: TI-S24048 (sold
separately)
• Max. consumption: 5.76W (no PoE)
Optional Power Adapter (48VDC3000 sold
separately)
• Input: 100 – 240V AC, 50/60Hz, 2A
• Output: 48V DC, 3.34A 160W max.
PoE
• PoE budget: 240W
Terminal Block
• Redundant power inputs, alarm relay contact, 6
pin
• Wire range: 0.34mm^2 to 2.5mm^2
• Solid wire (AWG): 12-24/14-22
• Stranded wire (AWG): 12-24/14-22
• Torque: 5 lb. – In / 0.5Nm / 0.56Nm
• Wire strip length: 7-8mm
Alarm Relay Contact
• Relay outputs with current carrying capacity of
1A, 24V DC
• Open circuit mode when two power sources
are connected
• Short circuit mode when only one power
source is connected
PoE+ Power Budget
Supplies up to 30W of PoE/PoE+
power per port on the industrial PoE
switch with a 240W PoE power budget
Network Ports
Industrial PoE switch with 16 Gigabit
PoE+ ports
DIN-Rail/Wall Mounts
IP30 rated metal enclosure with
included DIN-rail and wall mount
hardware
Switching Capacity
32Gbps switching capacity
Redundant Power
Dual redundant power inputs with
overload current protection (power
supply sold separately models: TI-
S24048 / TI-S48048)
Alarm Relay
Alarm relay triggered by power failure
of primary and/or redundant power
Jumbo Frame
Sends larger packets, or Jumbo
Frames (up to 9KB), for increased
performance
Extreme Temperatures
Industrial PoE switch rated for an
operating temperature range of -40 –
75° C (-40 – 167° F)
Shock and Vibration Resistant
Rated for shock (EN 60068-2-27),
freefall (EN 60068-2-32), and vibration
(EN 60068-2-6)
Grounding Point
Grounding point on the industrial PoE
switch protects equipment from
external electrical surges
TI-PG160