Datasheet

ManualsBrandsTrendnet ManualsOtherTI-PG1284i

Table Of Contents

12-Port Industrial Gigabit L2 Managed PoE+ DIN-Rail

Switch

TI-PG1284i (v2.0R)

• 8 x Gigabit PoE+ ports

• 4 x SFP slots

• Supports 1000Base-FX ﬁber SFP modules

• 240W PoE power budget

• PoE alive check restarts unresponsive PoE powered devices

• 24Gbps switching capacity

• Hardened IP30 rated metal housing

• Includes DIN-rail mounting bracket

• Operating temperature range of -40° – 75° C (-40° – 167° F)

• Supports LACP, STP/RSTP, VLAN, and IGMP Snooping

• IEEE 802.1p QoS with queue scheduling support

• CLI (Console / Telnet / SSH), Web (HTTP / HTTPS), SNMP

v1 / 2c / 3 management

• 802.1Q / Q-in-Q VLAN and IGMP Snooping / MLD / MVR

support

• 802.1p / DSCP / Queue Scheduling (SPQ / WRR) QoS

support

• Bandwidth control per port

• Dual inputs provide redundant power with overload current

protection

• Alarm output triggered by power failure

• Supports Ethernet Ring Protection Switching (ERPSv2)

• Power supply sold separately (models: TI-S48048)

• Lifetime Warranty

TRENDnet’s Industrial Gigabit L2 Managed DIN-Rail Switch series offers advanced layer 2 managed features with enhanced trafﬁc

controls to meet the evolving demands of today’s SMB networks. Each industrial layer 2 managed switch is equipped with an IP30

rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range

of -40° – 75° C (-40° – 167° F) for industrial environments. Our industrial layer 2 managed switch models feature copper Gigabit

ports for high-speed device connections, and SFP slots that support 1000Base-FX modules for long distance ﬁber networking

applications.

TI-PG1284i

These industrial layer 2 managed DIN-Rail switches provide an intuitive web-based management interface. Each TRENDnet

industrial layer 2 managed switch supports advanced trafﬁc management controls, troubleshooting, and SNMP monitoring.

Advanced managed switch features include LACP to group ports together to increase bandwidth between switches, VLANs for

segmenting and isolating virtual LAN groups, QoS for trafﬁc prioritization, port bandwidth controls, and SNMP monitoring making

each TRENDnet industrial layer 2 managed switch a powerful solution for SMB networks.

Summary of content (6 pages)

PAGE 1
TI-PG1284i 12-Port Industrial Gigabit L2 Managed PoE+ DIN-Rail Switch TI-PG1284i (v2.0R) • 8 x Gigabit PoE+ ports • 4 x SFP slots • Supports 1000Base-FX ﬁber SFP modules • 240W PoE power budget • PoE alive check restarts unresponsive PoE powered devices • 24Gbps switching capacity • Hardened IP30 rated metal housing • Includes DIN-rail mounting bracket • Operating temperature range of -40° – 75° C (-40° – 167° F) • Supports LACP, STP/RSTP, VLAN, and IGMP Snooping • IEEE 802.
PAGE 2
TI-PG1284i L2 Management PoE Power Industrial Design Provides an easy to use web management interface for trafﬁc management controls such as VLAN, QoS, access controls, link aggregation, troubleshooting, SNMP monitoring, and per port MAC restriction. A 240W PoE power budget supplies up to eight Power over Ethernet devices, and includes advanced PoE port controls such as enabling / disabling PoE, power priority, PD alive check, and power scheduling.
PAGE 3
TI-PG1284i FEATURES Network Ports System Monitoring Full PoE Control Per Port 8 x Gigabit PoE+ ports, 4 x Gigabit SFP slots allow for a 24Gbps switching capacity, and 1 x console port (RJ-45 to RS-232) for out-of-band management Monitoring features include SNMP v1 / v2c / 3, MIB support, SNMP trap, RMON Groups (1, 2, 3, 9), SMTP alert, syslog, port mirroring, SFP DDMI, and ModBus / TCP Available PoE port controls include enabling / disabling PoE, power priority, PD alive check, and power scheduling P
PAGE 4
TI-PG1284i DIMENSIONS (mm)
PAGE 5
TI-PG1284i SPECIFICATIONS Standards • IEEE 802.1d • IEEE 802.1p • IEEE 802.1Q • IEEE 802.1s • IEEE 802.1w • IEEE 802.1X • IEEE 802.1ab • IEEE 802.1ax • IEEE 802.3 • IEEE 802.3u • IEEE 802.3x • IEEE 802.3z • IEEE 802.3ab • IEEE 802.3ad • IEEE 802.3az • IEEE 802.3af • IEEE 802.
PAGE 6
TI-PG1284i Layer 3 Features • IPv4 / IPv6 static routing • IPv4 / IPv6 proxy ARP • IP interfaces: Up to 16 • Routing table entries: Up to 500 (IPv4: 400 / IPv6: 100) • DHCP Relay / Option 82 Weight DIP Switch Function 1 OFF Disable alarm relay for PWR power input ON Enable alarm relay for power failure on PWR power input OFF Disable alarm relay for RPS power input Warranty Enable alarm relay for power failure on RPS power input Package Contents Special Features • Netlite device discovery and m