Datasheet

ManualsBrandsTrendnet ManualsAutomationPoE Switch, Layer 2 Managed, 1Gbps, 240W, RJ45 Ports 8, PoE Ports 8

10-Port Industrial Gigabit L2 Managed PoE+ DIN-Rail

Switch 24 – 57V

TI-PG102i (v1.0R)

• 8 x Gigabit PoE+ ports

• 2 x SFP slots

• Supports 100/1000Base-FX ﬁber SFP modules

• PoE power budget: 240W@48VDC or 124W@24VDC

• PoE alive check restarts unresponsive PoE powered devices

• 20Gbps switching capacity

• Hardened IP30 rated metal housing

• Includes DIN-rail mounting bracket

• Operating temperature range of -40° – 75° C (-40° – 167° F)

• Supports LACP, STP/RSTP, VLAN, and IGMP Snooping

• IEEE 802.1p QoS with queue scheduling support

• Bandwidth control per port

• Dual redundant power inputs with overload current protection

• Alarm output triggered by power failure

• Power supply sold separately (models: TI-S24048, TI-S48048, TI-S12024)

TI-PG102i

TRENDnet’s 10-Port Industrial Gigabit L2 Managed PoE+ DIN-Rail Switch, model TI-PG102i, features eight Gigabit PoE+ ports with a 240W PoE budget,

and includes two SFP slots that support both 100Base-FX and 1000Base-FX modules for long distance ﬁber applications. The hardened switch is equipped

with an IP30 rated metal enclosure, designed to withstand a high degree of vibration and shock, while operating within a wide temperature range of -40° –

75° C (-40° – 167° F) for industrial environments. Advanced trafﬁc management controls, troubleshooting, and SNMP monitoring support make this a

powerful solution for SMB networks.

Summary of content (5 pages)

PAGE 1
TI-PG102i 10-Port Industrial Gigabit L2 Managed PoE+ DIN-Rail Switch 24 – 57V TI-PG102i (v1.0R) • 8 x Gigabit PoE+ ports • 2 x SFP slots • Supports 100/1000Base-FX ﬁber SFP modules • PoE power budget: 240W@48VDC or 124W@24VDC • PoE alive check restarts unresponsive PoE powered devices • 20Gbps switching capacity • Hardened IP30 rated metal housing • Includes DIN-rail mounting bracket • Operating temperature range of -40° – 75° C (-40° – 167° F) • Supports LACP, STP/RSTP, VLAN, and IGMP Snooping • IEEE 802.
PAGE 2
TI-PG102i PoE Power Integration Flexibility Industrial Design A 240W PoE power budget supplies up to eight Power over Ethernet devices, and includes advanced PoE port controls such as enabling / disabling PoE, power priority, PD alive check, and power scheduling. Managed features include access control lists, VLAN, IGMP snooping, QoS, RMON, SNMP trap, and syslog for monitoring and ﬂexible network integration.
PAGE 3
TI-PG102i Network Ports 8 x Gigabit PoE+ ports, 2 x Gigabit SFP Slots DIN-Rail Mount IP30 rated metal enclosure includes DIN-rail mounting bracket Jumbo Frame Sends larger packets, or Jumbo Frames (up to 10KB), for increased performance PoE Power Supplies up to 30W of PoE+ power per port with a 240W power budget Switching Capacity 20Gbps switching capacity Full PoE Control Per Port Available PoE port controls include enabling / disabling PoE, power priority, PD alive check, and power scheduling Acces
PAGE 4
TI-PG102i Speciﬁcations Standards Device Interface • IEEE 802.1d • IEEE 802.1p • IEEE 802.1Q • IEEE 802.1w • IEEE 802.1X • IEEE 802.1ab • IEEE 802.1ax • IEEE 802.3u • IEEE 802.3x • IEEE 802.3z • IEEE 802.3ab • IEEE 802.3ad • IEEE 802.3az • IEEE 802.3af • IEEE 802.3at • 8 x Gigabit PoE+ ports • 2 x 100/1000Mbps SFP slots • 6-pin removable terminal block (primary/RPS power inputs & alarm relay output) • DIP switches • LED indicators • Reset button Spanning Tree • IEEE 802.
PAGE 5
TI-PG102i Dip Switch Switch Status Function 1 2 3 4 5 6 Alarm Relay Output OFF Disable alarm relay for PWR power input ON Enable alarm relay for power failure on PWR power input OFF Disable alarm relay for RPS power input ON Enable alarm relay for power failure on RPS power input OFF Storm control managed by switch conﬁguration ON Enable storm control (Broadcast and DLF rate set to 300pps) Takes precedence over storm control switch conﬁguration OFF 802.