Datasheet

FEATURES
SPECIFICATIONS
Standards
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3ab
• IEEE 802.3x
• IEEE 802.3af
• IEEE 802.3at
Device Interface
• 8 x Gigabit PoE+ ports
• 2 x Gigabit SFP slots (1000Base-FX)
• 6-pin removable terminal block
• LED indicators
• Wall mount
• DIN-Rail mount
• Grounding point
Data Transfer Rate
• Ethernet: 10Mbps (half duplex), 20Mbps (full
duplex)
• Fast Ethernet: 100Mbps (half duplex),
200Mbps (full duplex)
• Gigabit: 2000Mbps (full duplex)
• SFP: 2000Mbps (full duplex)
Performance
• Data RAM Buffer: 0.25MB (Change unit of
measure)
• Switching Fabric: 20Gbps
• MAC Address Table: 11K entries
• Jumbo Frame: 10KB
• Forwarding rate: 14.88Mpps (64-byte packet
size)
Special Features
• Hardened components rated for extreme
temperatures
• Redundant power inputs
• Power DIN adapter (sold separately: model
48VDC3000)
• ESD 8kV support
• Low-profile design
DC Power
• Input: 48 – 56V DC
• Recommended power supply: TI-S24048 (sold
separately)
• Max. consumption: 4.8W (no PoE)
Optional Power DIN Adapter (48VDC3000
sold separately)
• Input: 100 – 240V AC, 50/60Hz, 2A
• Output: 48V DC, 3.34A 160W max.
PoE
• PoE budget: 240W
Network Ports
8 x Gigabit PoE+ ports, and 2 x
Gigabit SFP Slots
PoE Power
Supplies up to 30W of PoE+ power
per port with a 240W power budget
Hardware Design
Wall mountable hardware design
provides front access to ports and
power interfaces for easier installation
Compact
The flat and compact size makes the
front access switch ideal for cabinet
installations where space is limited
Mounting Hardware
Includes DIN-Rail bracket and
magnetic wall mount kit
Switching Capacity
20Gbps switching capacity
Redundant Power
Dual power inputs provide redundant
power with overload current
protection, and an output alarm relay
to indicate input power failure. (Power
supply sold separately, models: TI-
S24048, TI-S48048, and 48VDC3000)
Alarm Relay
Alarm relay output triggered by power
failure of primary or secondary power
inputs
Jumbo Frames
Sends larger packets, or jumbo frames
(up to 10KB), for increased
performance
Wide Temperature Range
Hardened industrial housing offers a
wide operating temperature range of
-40° – 75° C (-40° – 167° F), allowing
for installations in extreme hot and
cold environments
Shock and Vibration Resistant
Hardened design rated for shock (EN
60068-2-27), freefall (EN 60068-2-32),
and vibration (EN 60068-2-6) for
industrial settings
Electro Magnetic Compliance
Complies with industrial EMS
certifications (IEC 61000-4-2) ESD:
Contact: 6kV | Air: 8kV, (IEC
61000-4-4) EFT: Power: 2kV | Signal:
2kV, (61000-4-5) Surge: Power: 2kV |
Signal: 2kV
LED Indicators
Front access switch with LED
indicators that convey power and port
status
Grounding Point
Grounding point protects equipment
from external electrical surges
TI-PG102F