Datasheet

FEATURES
SPECIFICATIONS
Standards
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3ab
• IEEE 802.3x
• IEEE 802.3af
• IEEE 802.3at
Device Interface
• 8 x Fast Ethernet PoE+ ports
• 6-pin removable terminal block
• LED indicators
• DIN-Rail mount
• Wall mount
• Grounding point
Data Transfer Rate
• Ethernet: 10Mbps (half duplex), 20Mbps (full
duplex)
• Fast Ethernet: 100Mbps (half duplex),
200Mbps (full duplex)
Performance
• Data RAM Buffer: 1MB
• Switching Fabric: 1.6Gbps
• MAC Address Table: 1K entries
• Forwarding rate: 1.19Mpps (64-byte packet
size)
Special Features
• Hardened components rated for extreme
temperatures
• Dual redundant power inputs
• ESD 8KV support
• Low-profile design
DC Power
• Input: 48 – 56V DC
• Recommended power supply: TI-S24048 (sold
separately)
• Max. consumption: 5.76W (no PoE)
• PoE
• PoE budget: 200W
Terminal Block
• Redundant power inputs, alarm relay contact, 6
pin
• Wire range: 0.34mm^2 to 2.5mm^2
• Solid wire (AWG): 12-24/14-22
• Stranded wire (AWG): 12-24/14-22
• Torque: 5 lb. – In / 0.5Nm / 0.56Nm
• Wire strip length: 7-8mm
• Alarm Relay Contact
• Relay outputs with current carrying capacity of
1A, 24V DC
• Open circuit mode when two power sources
are connected
• Short circuit mode when only one power
source is connected
MTBF
• 510,304 hours
PoE+ Power
The industrial unmanaged PoE+
switches each supply up to 30W of
power per port and data over a single
Ethernet cable to PoE devices
Easy Installation
No configuration needed, simply
connect PoE+ network devices to the
industrial unmanaged PoE+ switch
Mounting Hardware
IP30 rated metal enclosure with DIN-
Rail mount and wall mount hardware
included
Redundant Power
Dual inputs provide redundant power
with overload current protection
(power supply sold separately, model:
TI-S24048)
Wide Temperature Range
A wide operating temperature range of
-40° – 75° C (-40° – 167° F) allows for
installations in industrial environments
with extreme hot or cold conditions
Shock and Vibration Resistant
Rated for shock (EN 60068-2-27),
freefall (EN 60068-2-32), and vibration
(EN 60068-2-6)
Electro Magnetic Compliance
Complies with industrial EMS
certifications (IEC 61000-4-2) ESD:
Contact: 6kV | Air: 8kV, (IEC
61000-4-4) EFT: Power: 2kV | Signal:
2kV, (61000-4-5) Surge: Power: 2kV |
Signal: 2kV
Grounding Point
Each industrial unmanaged PoE+
switch features a grounding point to
protect equipment from external
electrical surges
TI-PE80
Housing
• IP30 metal case
• DIN-Rail mount
• Wall mount
• Grounding point
Operating Temperature
• - 40° – 75° C (-40° – 167° F)
Operating Humidity
• Max. 95% non-condensing
Dimensions
• 142 x 105 x 37mm (5.6 x 4.1 x 1.5 in.)
Weight
• 486g (17.1 oz.)