Datasheet

Shock and Vibration Resistant
Rated for shock (EN 60068-2-27),
freefall (EN 60068-2-32), and vibration
(EN 60068-2-6)
Redundant Power
Redundant power inputs with
overload current protection (power
supply sold separately, model: TI-
S12048)
DIN-Rail / Wall Mounts
IP30 rated metal enclosure with
included DIN-Rail mount and wall
mount hardware
Easy Installation
No configuration needed, simply
connect PoE+ network devices to the
industrial Ethernet switch
1
2
3
Wide Temperature Range
A wide operating temperature range of
-40° – 75° C (-40° – 167° F) allows for
installations in industrial environments
with extreme hot or cold conditions
Grounding Point
Industrial Ethernet switch with
grounding point to protect equipment
from external electrical surges
PoE+ Power
The industrial Ethernet switch features
a 90W PoE+ power budget to supply
up to four Power over Ethernet
devices with PoE+ power
Fast Ethernet Ports
4 x Fast Ethernet PoE+ ports and 1 x
Fast Ethernet port
Switching Capacity
Industrial Ethernet switch with 1Gbps
switching capacity
SPECIFICATIONS
Standards
• IEEE 802.3
• IEEE 802.3u
• IEEE 802.3x
• IEEE 802.3af
• IEEE 802.3at
Device Interface
• 4 x 10/100Mbps PoE+ ports
• 1 x 10/100Mbps port
• 4-pin removable terminal block
• LED indicators
• DIN-Rail mount
• Wall mount
• Grounding point
Data Transfer Rate
• Ethernet: 10Mbps (half duplex), 20Mbps (full
duplex)
• Fast Ethernet: 100Mbps (half duplex),
200Mbps (full duplex)
Performance
• Data RAM Buffer: 56KB
• Switching Fabric: 1Gbps
• MAC Address Table: 1K entries
• Forwarding rate: 0.1488Mpps (64-byte packet
size)
Special Features
• Hardened components rated for extreme
temperatures
• Dual power inputs
• Auto-Negotiation
• Auto store and forward architecture
• Automatic address learning and address aging
• ESD 8KV and Surge 2KV protection
Power
• Input: 48 - 56 V DC
• Compatible power supply: TI-S12048 (sold
separately)
• Max. consumption: 2.24W
Terminal Block
• Redundant power inputs, 4 pin
• Wire range: 0.34mm^2 to 2.5mm^2
• Solid wire (AWG): 12-24/14-22
• Stranded wire (AWG): 12-24/14-22
• Torque: 5 lb. – In / 0.5Nm / 0.56 Nm
• Wire strip length: 7-8mm
MTBF
• 708,903 hours
Housing
• IP30 metal case
• DIN-rail mount
• Wall mount
• Grounding point
• 8KV ESD protection
• 2KV surge protection
TI-PE50
FEATURES