Quick Installation Guide TI-G80
1. Before You Start Package Contents ŸTI-G80 ŸQuick Installation Guide ŸRemovable terminal block ŸDIN-rail mount ŸWall mount plates Minimum Requirements ŸExisting network ŸPower Supply (TI-M6024) 2.
. Hardware Installation ŸThe TI-G80 can be placed on a desktop, wall, or mounted to a DIN-rail. DIN-rail Mounting Instructions 1. Attach the DIN-rail mount bracket to the switch. 2. Position the switch in front of the DIN-rail and hook the mount bracket over the top of the rail. 3. Rotate the switch downward towards the rail to lock it into place. You will know it is secure when you hear the click. Mounting the switch Releasing the switch 4.
Wall Mounting Instructions 1. Attach the wall mount plates to the switch. 2. Mount the switch. Safety Note ! ŸTurn off the power before connecting any module or wire. The correct power supply voltage (12 - 56 V DC) is listed on the product label. Check the voltage of your power source to make sure that you are using the correct part. Do NOT use voltage greater than 12 - 56 V DC, as specified on the product label. ŸCalculate the maximum possible current in each power wire and common wire.
Applying Power 1. Connect the power supply (sold separately) to the included terminal block (as shown below) and secure with the screws. Note: Polarities must match. 2. Attach the terminal block to the unit, secure with the included screws, connect the neutral wire to the ground, and supply power to the power adapter. 3. Connect a network source and devices to the switch. Check the LEDs to confirm the connections are established. Your installation is completed.
Manufacturer’s Name and Address TRENDnet, Inc. 20675 Manhattan Place Torrance, CA 90501 USA Product Information: Model Number: TI-G80 Product Name: 8-Port Hardened Industrial Gigabit DIN-Rail Switch TRENDnet Trade Name: TRENDnet hereby declare that the product is in compliance with the essential requirements and other relevant provisions under our sole responsibility.
TI-G80 Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service. Specific warranty periods are listed on each of the respective product pages on the TRENDnet website. Garantie Limitée TRENDnet garantit ses produits contre les problèmes de matériel ou de fabrication, dans des conditions normales d'utilisation et de service. Les périodes de garanties précises sont mentionnées sur chacun des pages produits du site web de TRENDnet.
TI-G80 Обмежена гарантія TRENDnet надає гарантію на свою продукцію щодо відсутності дефектів матеріалів та роботи за умови її належного використання та обслуговування. Конкретні гарантійні періоди перелічені на сторінці кожного виробу на сайті компанії TRENDnet. Certifications This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received.
