User's Guide

© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Managed Industrial L2 Switch
95
enable
show spanning-tree blockedports
This command displays the
spanning tree information for only
blocked port(s)
enable
show spanning-tree port detail
PORT_ID
This command displays the
spanning tree information for the
interface port.
enable
show spanning-tree statistics
PORT_ID
This command displays the
spanning tree information for the
interface port.
enable
show spanning-tree summary
This command displays the
summary of port states and
configurations
enable
clear spanning-tree counters
This command clears spanning-tree
statistics for all ports.
enable
clear spanning-tree counters
PORT_ID
This command clears spanning-tree
statistics for a specific port.
configure
spanning-tree (disable | enable)
This command disables / enables
the spanning tree function for the
system.
configure
spanning-tree algorithm-timer
forward-time TIME max-age
TIME hello-time TIME
This command configures the
bridge times (forward-delay,max-
age,hello-time).
configure
no spanning-tree algorithm-
timer
This command configures the
default values for forward-time &
max-age & hello-time.
configure
spanning-tree forward-time <4-
30>
This command configures the
bridge forward delay time (sec).
configure
no spanning-tree forward-time
This command configures the
default values for forward-time.
configure
spanning-tree hello-time <1-10>
This command configures the
bridge hello time(sec).
configure
no spanning-tree hello-time
This command configures the
default values for hello-time.
configure
spanning-tree max-age<6-40>
This command configures the
bridge message max-age time(sec).
configure
no spanning-tree max-age
This command configures the
default values for max-age time.
configure
spanning-tree mode (rstp|stp)
This command configures the
spanning mode.
configure
spanning-tree pathcost method
(short|long)
This command configures the
pathcost method.
configure
spanning-tree priority<0-61440>
This command configures the
priority for the system.
configure
no spanning-tree priority
This command configures the
default values for the system
priority.
interface
spanning-tree (disable|enable)
This command configures
enables/disables the STP function
for the specific port.
interface
spanning-tree bpdufilter
(disable|enable)
This command configures
enables/disables the bpdufilter
function for the specific port.
interface
spanning-tree bpduguard
(disable|enable)
This command configures
enables/disables the bpduguard
function for the specific port.
interface
spanning-tree rootguard
(disable|enable)
This command enables/disables the
BPDU Root guard port setting for
the specific port.
interface
spanning-tree edge-port
(disable|enable)
This command enables/disables the
edge port setting for the specific
port.
interface
spanning-tree cost VALUE
This command configures the cost
for the specific port.