User's Guide

© Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Managed Industrial L2 Switch
31
Wednesday | Thursday |
Friday | Saturday) MONTH
OCLOCK
configure
time daylight-saving-time
end-date (first | second |
third | fourth | last) (Sunday
| Monday | Tuesday |
Wednesday | Thursday |
Friday | Saturday) MONTH
OCLOCK
This command sets the end date for
the Daylight Saving Time.
For Example: Last Sunday 10 18 (PM: 6
Last Sunday in October)
configure
no time daylight-saving-time
This command disables daylight saving
on the Switch.
configure
time ntp-server IP_ADDRESS
This command sets the IP address of
your time server.
configure
no time ntp-server
This command disables the NTP server
settings.
configure
time timezone VALUE
Selects the time difference between
UTC (formerly known as GMT) and your
time zone.
Valid value: -1200 to 1200.
Example:
[DEVICE_NAME](config)#time ntp-server 192.5.41.41
[DEVICE_NAME](config)#time timezone +0800
[DEVICE_NAME](config)#time ntp-server enable
[DEVICE_NAME](config)#time daylight-saving-time start-date first Monday 6 0
[DEVICE_NAME](config)#time daylight-saving-time end-date last Saturday 10 0
Web Configuration
Basic Settings > General Settings > SNTP
Parameter
Description
Current Time and Date
Current Time
This field displays the time you open / refresh this menu.
Current Date
This field displays the date you open / refresh this menu.
Time and Date Setting
Manual
Select this option if you want to enter the system date and time
manually.